The National IV Dongfeng Ruiling Medical Waste Transfer Vehicle, the National IV emission standard, adopts the Dongfeng Ruiling Class II cargo carrier, model DFA1041SJ35D6. The engine uses the D28D10-4DA, 75-power/102-hp diesel engine produced by Dongfeng Light Engine Co., Ltd. Cab with rollover, single row cab, cab with direction assistance, clutch booster, front axle 2 tons, rear axle 4 tons, wheelbase 3300, tire 7.00R16 wire tire. Body introduction: the body is fully enclosed, the back door is a double sealed structure (set the double back door and the inner door two doors, a gas spring is set on the inner door to facilitate the opening of the inner door up and down) to ensure that the inside of the box is filled with rubbish The partition of medical treatment and the outside world also facilitates the loading and unloading of goods. The stainless steel plate inside the body is used for the inside wall, and the corrosive disinfectant is resistant to acids and alkalis. Arc stainless steel and corners are arranged around the inside of the compartment. There is no clear corner for disinfection and cleaning. . L-type compartment: The medical waste transfer car compartment is divided into the cargo loading compartment and the medical article storage compartment. A single-side door is set outside the medical article storage compartment (the assistant driver) to facilitate the storage of medical and medical equipment to ensure the safe storage of medical waste. And the personal safety of staff. Automatic spraying device (optional): The medical waste transfer body can be equipped with an automatic spraying device. The automatic spraying control system is set in the cab or in the compartment where the medical device is placed, for the type of the disinfecting solution and the spraying time. The requirements of the spray time setting adjustment (10S-5min), the use of automatic spraying device, spraying the disinfectant can quickly kill a variety of microbial bacteria in the cabin, so that transport and handling more secure and reliable. Contact Tel 0722-3821899 Contact, Zhou Zhongxing http:// Http :// WWW . HBCL99 . COM Sales Hotline: 15897596858
Snoworld Flake Ice Evaporator
Special design, high efficiency and energy saving
In design and development, the internal structure is paid with special attention so as to improve the heat conduction efficiency of the inner wall of evaporator and keep the loop unblocked with special technology,
The internally-scraping mode has been adopted. Under this mode, ice blades scape ice on inner wall while the evaporator itself doesn`t move at all. It reduces loss of energy as much as possible, which guarantees the supply of refrigerant and lowers the probability of leakage.
Special material
In terms of material, a special kind of imported alloy is adopted. Its heat conduction performance is superior and conforms with international standards for refrigeration pressure containers.
Special processing
We have specially developed a set of technology of welding, surface treatment and stress elimination. It is realized by the advanced equipment of welding, heat treatment and stress.
Water return system
The water flowing down the inner wall of evaporator flows into the water channel through the water pan at the bottom of evaporator and then into the water sink. The large-area design and structure of water reception pan ensure that no water leaks from the bottom of ice flaker and avoid lumped ice flakes.
Flake Ice Evporator,Flake Ice Machine Evaporator,Flake Ice Evporator Stainless Steel,Snowkey Flake Ice Evaporator Fujian Snowman Trade Co., Ltd. , https://www.sinoicemachine.com
Office Phone: 0722-3821899
E-mail: