scooter fuel tank, frame body, plastic
cover parts, speedometer, tires, front & rear shock, handle switch, head
light, rear light, turning light, seat, horn, front wheel, rear wheel, front
disk brake, rear drum brake, cables, wire harness, regulator, flash, start
relay, CDI, carburetor, air cleaner, springs, battery, foot step, carrier, safe
guard, mirror, helmet.
Scooter Spare Parts,HONDA-style Scooter Spare Part, Yamaha-style Scooter Spare Part, Mini Vespa Scooter Spare Part JIANGMEN CHANGHUA GROUP CO., LTD. , https://www.changhuagroup-motor.com
1) Create new unit
According to the bid-related data, the proportions of electrostatic precipitators, bag-type and electric-bag composite dust collectors in newly built projects were calculated as 80% and 20% respectively. From April 2013 to 2015, 130 million kW of thermal power was added in China. There will be 104 million kW of electrostatic precipitator projects and 0.26 million kW of bag and electric bag compound dust collectors in the installed capacity.
Assume that the cost of a new electrostatic precipitator for a 600 MW unit is about 35 million yuan, the cost for a new electrostatic precipitator for a 1000 MW unit is about 50 million yuan, and the ratio between a 600 MW unit and a 1000 MW unit is 1:1, after calculation, 1.04 The market share of the electrostatic precipitator for a new-generation 100-kilowatt generator is about 5.5 billion yuan.
2) Transform the unit
According to the relevant calculation results, as of the end of 2011, about 521 million kW units nationwide carried out dust removal and transformation, and the proportions of electrostatic precipitators, bag-type and electric-bag composite dust collectors in reconstruction projects were 70% and 30%, respectively, and about 4.2%. Million kW units need to carry out dust and efficiency improvement. According to the bid-related data, it is estimated that from the end of 2011 to July 2013, the total installed capacity of the electrostatic precipitator reconstruction was about 308 million kW. After conversion, there are still about 382 million kW units that need to be modified by electrostatic precipitators.
Suppose a set of 300MW unit dust removal equipment reconstruction costs about 15000000 yuan, a 600MW unit dust removal equipment renovation costs about 25000000 yuan, 300MW units and 600MW units ratio of 3:1, after calculation, 382000000kW The market share of transforming unit electrostatic precipitators is about 18 billion yuan.
3) Market Forecast of Wet Electrostatic Precipitators
Wet electrostatic precipitator is a fine processing technology equipment for controlling pollutants in coal-fired power plants. According to their applicable occasions, the country implements special emission limits and strictly controls PM2.5 in regions, and in some regions, new standards are implemented for newly-built coal-fired units. At the time, the adoption of this technology in coal-fired power plants is a short-term, economical option. It is estimated that the proportion of wet electrostatic precipitators in newly built and reformed units will be more than 5% from 2013 to 2015, assuming that the investment costs for 300 MW, 600 MW, and 1000 MW units supporting wet electrostatic precipitators are 20 million yuan, 30 million yuan, and 4000 respectively. RMB 10,000, the ratio of 600 MW units to 1000 MW units in the newly built project is 1:1, the ratio of 300 MW units to 600 MW units in the reconstruction project is 3:1, and the market share of wet wet electrostatic precipitator in newly built units is 104 million kW. For 230 million yuan or more, the market share of wet electrostatic precipitators in 382 million kW reformed units is more than 1.15 billion yuan, totaling more than 1.4 billion yuan.
4) Total
In the sum above, from mid-2013 to 2015, the market share of electrostatic precipitators in the power industry alone was about 25 billion yuan, which means that there is a market share of nearly 10 billion electrostatic precipitators per year.
Electrostatic precipitators are now widely used in electric power, building materials, iron and steel, nonferrous metals, papermaking, electronics, light industry, machinery and major industrial furnaces and kilns and other industrial sectors. In order to meet the increasingly stringent environmental emission standards, the promotion of low-low temperature, wet, mobile electrode and other electrostatic precipitation technologies in the industry and a reasonable combination of the above technologies with the ones that have been used in China and are effective in the past can completely overcome the bottleneck of electrostatic precipitators currently considered. , can greatly expand the use of electrostatic precipitator.
In the 21st century, the rapid development of the world economy, the shortage of resources, and the increasingly complex geopolitical game have made the issue of energy highly concerned by all countries in the world. As the world’s largest developing country and a big energy consumer, China must closely follow the development trend of the world’s energy science and technology, actively carry out cutting-edge technological research, and strive to occupy the commanding heights of the world’s energy science and technology.
China's electrostatic precipitator equipment has considerable competitiveness in the international market. In recent years, the export momentum has been rapid. For emerging industrial countries such as India, Indonesia, Vietnam, Brazil and Chile, the demand for electricity from industrial development is urgent and there is a huge dust removal market. China is currently the main supplier of electrostatic precipitators for the above countries.
According to relevant information, India, Indonesia and Vietnam will have 21.5 billion kW of newly-built thermal power units in the next five years, all of which will require supporting flue gas dust removal devices, with a market capacity of between 10 billion and 12.5 billion U.S. dollars. Such as conservatively accounted for 70% of the electric dedusting market accounted for, the market capacity of electric dedusting is 7 billion to 8.75 billion U.S. dollars, with an annual average of 1.4 billion to 1.75 billion U.S. dollars.
In addition, when the electrostatic precipitator equipment that was developed in the Western developed countries has reached the point where it needs to be replaced, China will have great competitiveness and a certain amount of market space due to its technical and price advantages.
In short, the domestic market and the international market still have a large demand for electrostatic precipitators. With the continuous emergence of new technologies and new processes for electrostatic precipitators, the development of electrostatic precipitators has a lot of room. Under the background that the country regards the environmental protection industry as an economic support point, the electrostatic precipitator industry is committed to purifying the blue sky and protecting the environment, adding a touch of color to the beautiful China and to the improvement of the atmosphere on which humankind depends.
2015 China Electrostatic Precipitator Industry Market Analysis
According to Xinhua News Agency, as of April 2012, China's installed thermal power capacity reached 770 million kW. Calculated at an average annual growth rate of 7.8%, as of April 2013, China's thermal power installed capacity has reached 830 million kW. Based on this, as of 2015, China will have 130 million kW of new thermal power installed capacity.