The standard ER collets is the most widely used clamping tool in the world.Made from Alloy spring steel and fully hardened, the ER collets are ideal for many machining, including boring,milling,reaming,tapping,and grinding.
Straight Collets,ER Collets,OZ Collets,OZ Collet Chucks SISHUI TELI TOOL CO.,LTD. , https://www.er-collets.com
Ice and snow days! The car was placed outdoors, and if it was accidentally frozen, did you have the same problem? There is no change in the hot car for more than ten minutes. How can this be good?
The following Xiaobian tells you some ways to let you drive directly to work in two minutes!
How to do ice mirror mirroring If your car has a car mirror heating function, this problem is easily solved. If you do not have to, you have to prepare a bottle of water, poured in the rearview mirror, the ice quickly melted , And then wipe it with a dry cloth, it is not enough to prepare a discarded bank card, scraping in one direction, not too hard.
How to prevent: You can use a plastic bag to cover the mirror before the night comes and fix it with a rubber band or a clip. When you take the bag the next morning, you will find no frost on the mirror.
The first thing to do when windows and windshields are frozen is the hot car. Then the snow on the body and glass is shoveled off. The engine is also hot during the snowing time. At this time, enter the car, open the warm wind, set the windshield before blowing the wind mode, open the rear windshield to heat, and after a few minutes, the snow and ice will melt.
How to prevent it: On the night before the frost, use raw onions to wipe your windows and windshield. This strange little trick will keep your car away from frost and ice. Another way to avoid freezing is to cover the windshield with a rubberized bath mat.
What to do if the wiper is frozen? After you find that the wiper is frozen, do not use force to pry or use hot water. Otherwise, the wiper will be deformed and the glass will crack. The correct method is to open the air conditioning heater after the hot car, adjust the wind direction to the position of the windshield before blowing, and thaw it after a few minutes.
How to prevent: Use a soft rag to forcefully apply rubbing alcohol and wipe the wiper. Alcohol prevents the wiper from freezing on the glass, so even in the coldest weather of the year, this trick is absolutely useful.
How to do when the door lock is frozen, the best way to do this is to use a hair dryer to blow the array of hot air against the lock cylinder and open it in a moment. Or use a lighter to heat your car key, and then gently insert the high-temperature key into the lock. The ice of the keyhole can melt when exposed to high temperatures.
How the door is frozen when the door is frozen, this situation is not easy to solve, then you can only use the hot water icing icing, but immediately after opening the door to dry the residual water, otherwise the door will knot Thicker ice, to say this the probability of the situation is not low, but after reading this article can not blame Xiaoyan did not remind everyone.
What to do if the handbrake is frozen? When there is no obstacle before and after the confirmation, insert a gear or reverse gear, and try to move back and forth by tapping the gas pedal lightly. If the effect is not good, you can also use the jack to support the rear wheels of the vehicle and use your feet to force the rear wheels.
How to do when the tire is frozen How to do it When the tire is frozen, do not harden it. Use a shovel to remove the ice. Be careful not to damage the tire. Afterwards, using the above handbrake method, either a first gear or reverse gear is engaged, and lightly step on the accelerator or try to move the vehicle by idling.
What if the glass water is frozen? If you use glass water, you can see that the water is not sprayed, and the glass water is full, indicating that the glass water is frozen. Do not spray water at this time, otherwise it will damage the water spray motor.
If the sunshine is better, you can drive the car to the sun at noon and open the lid to the sun. If the glass is not frozen for a while, it will open. If this method does not work, you can add it to the glass water tank. Some warm water should be drained from the water in the kettle as soon as possible after the glass is hydrated to prevent it from being frozen again.
1.Main specifications: ER8, 11, 16, 20, 25, 32, 40, 50,etc
2. Er elastic collet, large clamping force, wide clamping range, good precision, excellent quality.
3.Used for boring, milling, drilling, tapping, grinding carving and other processing.
