Contact Tips M8X30 for Binzel Welding Torches

Model NO.: M8X30
Packing: 50PCS/Bag or 10PCS/Box
Trademark: Huarui
Transport Package: 50PCS/Bag Neutral Package
Specification: M8*30
Origin: Changzhou, China
HS Code: 85159000
Contact Tips M8X30 for Binzel Welding Torches

Contact Tips M8X30 for Hrbinzel Welding Torches
Item CO2 Contact Tip/Welding Torch Tip Compatible for  Binzel MB36KD/MB40KD/MB501D Torch
Material Cu-E/CuCrZr
Type 140.0114, M8*30*0.8
140.0214, M8*30*0.9
140.0313, M8*30*1.0
140.0442, M8*30*1.2
140.0533, M8*30*1.4
140.0587, M8*30*1.6
140.0653, M8*30*2.0
140.0677, M8*30*2.4
Packing 50pcs/bag
Certification ISO9001, CCC, CE, ROHS, TUV
Contact Tips M8X30 for Binzel Welding Torches
Contact Tips M8X30 for Binzel Welding Torches

Changzhou Huarui Welding & Cutting Co., LTD

Since the establishment in 1985, we have become one of the biggest manufacturers of welding
and cutting equipment and accessories in China by modern manufacturing equipment and special
technology. 
We are specialized in manufacturing MIG, TIG, PLASMA, Welding Torches and Spare parts.
With Euro connector, Lincoln connector , Miller connector and Tweco connector, we can fit
different kinds of foreign equipments.
1.MIG Welding Torch
Binzel, Bernard, Tweco, Esab, Lincoln/Tregaskiss, Panasonic/OTC, MAXI, Kemppi, Fronius,
Mechafin.
2.TIG Welding Torch
WP-24, WP-9,WP-17, WP-26, WP-20, WP-18, etc.
3.Plasma Cutting Torch
Trafimet, Cebora, Panasonic/Esab



Contact Tips M8X30 for Binzel Welding Torches

Contact Tips M8X30 for Binzel Welding Torches
FAQ
Q1: Can I get a samples to check the quality?
A:Sure,we can supply samples. For regular goods, the sample cost is different from the amount
you want.
For our new products, there's a MOQ of the samples.
Q2: Can I put my logo on the boxes/cartons?
A: Yes, this can be made according to your requirements, but you should send us the trademark
authorization letter.
Q3: How can you guarantee your products quality ?
A: Huarui's each torch must pass the following tests before packing: Insulation resistance test,
High voltage test, Air/Water flow test, Air/Water seal test.
If there are defective items, we usually credit to our customer or replace in the next shipment.
Q4: What's the order procedure?
A: Firstly, we discuss the details together by e-mail or TM. Then we issue you a PI for your
confirmation or Trade
Assurance Order Payment Link. You will be requested to do the pre-paid full payment before we
go into the production. After we get the payment, we start to process the order. It usually takes
5-15days if we don't have the items in stock.

 

Oxygen Machine is one kind of product producing oxygen from air. There are small oxygen machine providing 3-10 liter per minute flow, mainly using at home. There are also big Industrial Oxygen Generator providing oxygen with flow rate up to 10000 Nm3/hr. From technology, there are pressure swing adsorption(PSA) , vacuum swing adsorptio (VSA)and cryogenic three types. The PSA type is for smaller flow rate within 300 Nm3/hr, from 300 to 3000 Nm3/hr, it is ok to use VSA technology. For bigger flow rate, normally use cryogenic Oxygen Plant.


No matter what technology, these oxygen machines all use oxygen in the air. All use Air Compressor to provide raw material, compressed air. Then the compressed air will be cleaned, dried for futher separation. After separation, the produced oxygen either directly goes to oxygen using point or they are compressed into high pressure such as 150 bars or 200 bars, then stored in cylinders and tanks.

Oxygen Machine

Oxygen Machine,Stationary Oxygen Machine,Compact Oxygen Machine,Oxygen Generation Equipment,Oxygen Producing Plant

Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagas.com