Working Principle
Chenwei Series Vibration Polishing Machine has a ring chamber to hold media (abrasive stones) and work pieces.When the machine start working,it makes three-D high frequency vibration.This motion makes the media work on surface of work pieces upward &downward;leftward and rightward;frontward and backward.The process is similar to handwork of surface polishing.
The machine structure
Vibratory Polish machine is composed of inertial vibrator, vessel, electrical cabinet and basement.
Polishing Machine Polishing Machine,Car Polishing Machine,Wheel or Polishing Machine,Car Alloy Wheel XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.cwsieve.com
General Introduction:
75HP 4WD tractorÂ
55KW diesel engineÂ
8+2 gear shiftÂ
Hydraulic steeringÂ
Dual stage clutchÂ
Various implements available
Technical Specification:Â
Model
JM-754
Drive Type
4WD
Overall Dimensions L×W×H(mm):
4085×1929×2568
Wheel Track (mm)
F: 1450 / R:1370-1790
Wheel Base(mm)
2236
Ground Clearance (mm)
340
Rated Traction Force(N)
16000
Construction Mass(kg)
3215
Min.Turning Radius(m)
4.3
Engine Model
LR4B3-23
Type
4-cylinder 4-stroke cycle water cooled
Rated Power(kw/hp)
55(75)
Rated Speed (rpm)
2300
Clutch
Dual stage
Gear Box
(4+1)×2 Sleeve gear shift
Main Drive
One pair of spiral bevel gearing
Differential
Bevel gear
Differential Lock
Sliding pin, foot operated
Final Transmission
Planetary reduction gear
Steering Gear
Hydraulic steering
Brake
Disc type
Tyre
F: 8.3-24 / R:14.9-30
3-Point Suspension
Category: II
PTO Shaft
540/1000
Fusenmach provides different size tractors from 20HP to 180 HP.Â
Some hot-sell models are approved by OECD and E-MARK Certificate.
The tractors are widely used in wet & dry farm land, garden, transportation in plain or hilly areas.
We also provide tractor implements like front end loader, backhoe, trailer, mower, wood chipper, hole digger, subsoiler, rotavator, tiller, cultivator, plough, harrow, sprayer, hay baler, etc.
Â
75HP 4WD diesel engine  wheel tractor with CanopyÂ
General Introduction:
75HP 4WD tractorÂ
55KW diesel engineÂ
8+2 gear shiftÂ
Hydraulic steeringÂ
Dual stage clutchÂ
Various implements available
Technical Specification:Â
Model
JM-754
Drive Type
4WD
Overall Dimensions L×W×H(mm):
4085×1929×2568
Wheel Track (mm)
F: 1450 / R:1370-1790
Wheel Base(mm)
2236
Ground Clearance (mm)
340
Rated Traction Force(N)
16000
Construction Mass(kg)
3215
Min.Turning Radius(m)
4.3
Engine Model
LR4B3-23
Type
4-cylinder 4-stroke cycle water cooled
Rated Power(kw/hp)
55(75)
Rated Speed (rpm)
2300
Clutch
Dual stage
Gear Box
(4+1)×2 Sleeve gear shift
Main Drive
One pair of spiral bevel gearing
Differential
Bevel gear
Differential Lock
Sliding pin, foot operated
Final Transmission
Planetary reduction gear
Steering Gear
Hydraulic steering
Brake
Disc type
Tyre
F: 8.3-24 / R:14.9-30
3-Point Suspension
Category: II
PTO Shaft
540/1000
Fusenmach provides different size tractors from 20HP to 180 HP.Â
Some hot-sell models are approved by OECD and E-MARK Certificate.
The tractors are widely used in wet & dry farm land, garden, transportation in plain or hilly areas.
We also provide tractor implements like front end loader, backhoe, trailer, mower, wood chipper, hole digger, subsoiler, rotavator, tiller, cultivator, plough, harrow, sprayer, hay baler, etc.
Â
The grinding stones are rolling forward and they are grinding each other during .this makes the work pieces ,polished and clean.
To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.
Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.
Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of workpieces on vessel. (For CWP series, there is a separator on the vessel to seperate the workpieces from the stones. )
Electrical cabinet: Operate the machine by buttons on the control panel.
Basement: It is weld of steel, and it has springs to hold the vessel
75HP 4WD Diesel Engine Wheel Tractor with Canopy
Model NO.: 754
Service Life: 6-10 Years
Size: Small
Color: Red
Condition: New
Drive Type: 4 Wheel Drive
Trademark: OEM
Transport Package: Steel Crate
Specification: 75HP
Origin: China
HS Code: 87019011
Model NO.: 754
Service Life: 6-10 Years
Size: Small
Color: Red
Condition: New
Drive Type: 4 Wheel Drive
Trademark: OEM
Transport Package: Steel Crate
Specification: 75HP
Origin: China
HS Code: 87019011
75HP 4WD diesel engine  wheel tractor with CanopyÂ