Shelter Canada • Gordon (Sherritt Gordon) in 1954 successfully used in pressurized ammonia leaching of nickel pyrite leaching, but also had a lot of acid leaching studies. They studied a hybrid pentlandite - Yellow copper ore - pyrrhotite leach ingredient: Ni 10%, Cu5%, Fe 30%, S 30%. When the temperature is 210 ° C and the partial pressure of oxygen is 700 kPa, the leaching rate of nickel and copper can reach 99% [1] .
We started making this kind of manual lathe machine since 1955 as one of a leading state-owned companies, which is used for metal cutting or processing as traditional ways, and of great quality upon on more than 66 years experience.
It is with precision ground and hardened bed ways,and removable gap is provided for bigger diameter of workpiece.
Different specification or requirements could be customized based on demands.
Center Lathe, Centre Lathe, Machine Tool, Lathe Machine, lathe machining Yuxi JianFu Group Machine Tool Co., Ltd. , https://www.yucymachine.com
1990s, Keming Ke (Cominco) Engineering Services [2], Pellet • Joseph Dong (Placer Dome), General Gold Resources Inc. (General Gold Resources) and other tests over temperature chalcopyrite leaching process. For example, the leaching of porphyry copper ore, chalcopyrite, chalcopyrite-bronite ore (including Cu 41.4%, Fe 22.2%, S 28.0%), etc., at 200-210 ° C, 2 MPa oxygen Under the pressure of 60 min, the copper leaching rate is about 99%. The leachate contains 36-78 g/L of copper, 40-31 g/L of sulfuric acid, and less than lg/L of iron.
references:
1.Berezowsky R, Trytten L, ALTA Copper—7 Technical Proceedings, 23 May 2002, Perth, Australia
2. Jones DL, US Patent 5316567, May 31 1994
