First, the existence form of sulfur Pyrite Cinder sulfur are: fully sintered iron ore sulfur, sulfates, and partially soluble sulfide. Due to time and funding reasons, this part of the content has not been studied in depth. Therefore, it can only be judged according to the indicators. Second, mechanical off S As can be seen from the table below, the raw material has a fine particle size, the content of -200 mesh is 57.8%, the iron is mainly concentrated in the fraction of -0.1 to +0.019 mm, and the grade of iron is high. S is mainly concentrated in the coarse-grained grade, while the grade of iron in the +0.15mm grade is lower, and the grade of +0.15mm only accounts for 3.9% of the burnt residue. Therefore, the pyrite cinder (dry ore) is sieved with 100 mesh, and the content of the product S under the sieve is greatly reduced, and sulfur can be considered in the sieve level. Table slag screening analysis results Granular grade Yield(%) grade(%) Fe S Pb Zn SiO 2 +0.28 2.38 26.20 2.66 0.75 1.21 30.34 -0.28+0.15 1.56 28.12 1.08 0.36 1.16 38.73 -0.15+0.1 4.73 47.48 0.46 0.23 0.81 21.68 -0.1+0.074 18.42 57.59 0.40 0.22 0.59 11.43 -0.074 + 0.037 37.64 60.22 0.20 0.18 0.44 8.29 -0.037+0.019 24.50 53.36 0.22 0.36 0.56 14.19 -0.019+0.010 4.99 42.04 0.41 0.79 0.79 23.00 -0.010+0.005 0.9 37.89 0.56 0.94 1.01 25.50 -0.005 4.84 9.34 0.20 0.42 0.26 8.35 S, SO 2 , SO 3 and the like generated during the calcination of pyrite slag are adsorbed in the pores of the slag, and salts are formed at a high temperature with the active element in the slag. The sulfur in the form of such free sulfur, SO4 2 - and soluble SO 4 2 - is soluble in water, and part of the sulfur can be removed by dissolution and flushing at the time of selection. After grinding, the mineral will reach a higher monomer dissociation. Stirring for a certain period of time before sorting can increase the removal rate of S by 50% to 60%, and the content of S in the slag can be reduced to about 0.35%. The slag is scrubbed through the spiral chute in the process, and the water-insoluble FeS and FeS 2 and the partially soluble sulfate in the slag are removed, which naturally reduces the sulfur and silicon content in the slag. At this time, the content of S in the slag is about 0.2%. Other desulfurization methods cannot be carried out due to time and funding, and the sulfur content has reached the requirements of the project, so there is no need for further research.
Coffee Grinder
Easy to use - all you need to do is select the grind you require and at the press of a button you will be enjoying the taste of freshly ground coffee. This compact Sunbeam auto coffee grinder is very easy to use - all you need to do is select the grind you require and at the press of a button you will be enjoying the taste of freshly ground coffee. Also used as a herb and spice grinder. As coffee beans are oily and aromatic, the stainless steel grinding bowl surface ensures minimal transfer of flavours and odours. It includes some features that make it very easy for you to use such as stainless steel grinding bowl, transparent lid and a cord storage compartment to keep the area tidy. powerful full copper motor from 150W-250W/110V-240V/50Hz-60Hz
Coffee Grinder,Small Coffee Grinder,Electric Coffee Grinder,Coffee Maker With Grinder JIANGMEN CHANGYU ELECTRIC APPLIANCES MFG.CO.,LTD. , https://www.changyu-blender.com