Line Feeding for Enclosed Conductor Rail

  • Model NO.: HFP52
  • Trademark: NANTE
  • Specification: HFP
  • HS Code: 854449
  • Material: Plastic/Steel
  • Transport Package: Iron Frame Box, Wooden Case, Naked
  • Origin: China
General

Soler Enclosed conductor rail system is a conductor, protected from contact (IP23),for indoor and outdoor plants. They are conductor lines in a rigid green PVC housingwith different copper cross sections for rated currents of 50-140A.
The current collectors, running in ball bearings, are guided by the housing.
The main is transferred by spring-stored carbon brushes.
Type HFP-P:not include Sealing strip, with factory-mounted flat copper band and bolted-operated plug connectors.
Type HFP-R:Curves for R≥800mm,with factory-mounted flat copper band and screw connectors.
Approved and listed by: CCC,ISO9001 and CE.
 
Type Weight(kg)
52LF/500-4/80A 1.77
52LF/500-4/140A 2.02
52LF/500-7/80A 3.05
52LF/500-7/140A 3.50
System photo 

Line Feeding for Enclosed Conductor Rail

Technical data

Electrical properties:

Mechanical properties:

Max.current:240A

Flexible strength: 75N/mm2±10%

Max.voltage:690V

Tensile strength: 75N/mm2±10%

Dielectric strength:30-40KV/mm

Temperature range:

Spec.resistance:5x1015Ohmxcm

Standard Housing:-20°C up to +70°C

Surface resistivity:1013 Ohmxcm

High Temp.Housing: -10°C up to +115°C

Leakage resistance:CT1600-2.7

Low Temp.Housing: -40°C up to +80°C

Combustibility:

Flame retardant: Class B1-no flaming particles,self-extinguishing

Self extinguishing: Class B1-no flaming particles,self-extinguishing

Resistance to chemicals:+45°C

                    Gasoline        Sulphuric acid 50%

                    Mineral Oil      Caustic soda 25%&50%

                    Grease         Hydro-chloric acid, concentrated

 

Connection:

Through plastic joint caps

Feed Sets:

Line feeds or end feeds
Line Feeding for Enclosed Conductor Rail
 

End caps:

The open ends of the powerail are closed by end caps for HFP52.
Line Feeding for Enclosed Conductor Rail
 

Hangers:

Standard brackets for powerail attachment to crane girders are available .

Powerail with sliding and fixpoint hangers.

Standard distance between suspension points for indoor and outdoor.

Installations:1200mm.
Line Feeding for Enclosed Conductor Rail
 

Expansion during temperature fluctuation

The Expansion sections are required to compensate the different expansions between copper conductors and steel or concrete structures, in varying temperatures without interrupting electrical power.

Anti-condensation sections

These sections are used for transfer of the Powerail to outdoor areas to avoid condensation. The Powerail is not separated electrically.

Sectioning

Available as air gap version(5mm),where the collector carbon bridges the gap, e.g. for mains. Also available as insulating piece version(35mm). In this case the insulating piece is longer than the carbon and each Powerail section can be separated electrically, e.g. for control.

Current collectors:

The current collectors are made of re-inforced polyester fiberglass, for high strength and light weight. Spring loaded carbon brushes maintain uniform contact. Connecting cables and hinged or flexible towing arms included. Double collectors for transfer applications and higher amperage.

Hand Held Enclosures

Hand Held Enclosures

Hand Held Enclosures,Handheld Enclosure,Industrial Enclosure Manufacturers,Security Cabinets

wybox inc. , https://www.wybox-inc.com