LCD Touch Screen Controlled Infusion Syringe Pump

Model NO.: EQ-500SP
Travel Range: 0.001 --120 mm
Pumping Rate: 0.1 -- 45 mm/Min
Micro Speed Adjustment: 0.01 -- 8 mm/Min
High Voltage: 12kv
Warranty: One Year
Trademark: CY
Transport Package: Wooden Box
Specification: 20ml
Origin: Zhengzhou, China
HS Code: 85141090
LCD Touch Screen Controlled Infusion Syringe Pump with (0-45 ml/min) & Optional Heatable Syringe - EQ-500SP
EQ-500SP(-H) is a single channel Syringe pump with large LCD control. It is designed for precise liquid injection for various coating applications such as ultrasonic spray coating, spinning coating and so on. Heatable syringe and temperature controller is available at additional cost, please select from the optional bar, which allows researcher to make new polymer coating at a certain temperature liquid
 
Model  EQ-500SP Syringe Pump w/o Temperature Control
              
Syringe One 20 mL glass syringe is included for immediate use         
Heatable Syringe & Temp. Control Heatable syringe & temperature control system is not included.
Input Power Requirement 110- 220 V AC 


Features 		Easy to use 4.25" LCD touch screen (no computer interface)
Holds syringes from 0.4 mm up to 30 mm in diameter
Remembers previous settings on power up
Pumping rate: 0.1 -- 45 mm/min
Travel range: 0.001 --120 mm
Micro speed adjustment: 0.01 -- 8 mm/min
High voltage resistance up to 12 kV
Precise reproducible flow rates
Infuses Only. Do not withdraw the syringe
Syringe
 		 20ml Glass syringe
OD: 24mm
ID: 20mm
Total Length with booster: 145mm
Dimensions 345 mm L x 335 mm W x 190 mm H
Warranty One Year limited warranty with lifetime support

LCD Touch Screen Controlled Infusion Syringe Pump
LCD Touch Screen Controlled Infusion Syringe Pump
LCD Touch Screen Controlled Infusion Syringe Pump
LCD Touch Screen Controlled Infusion Syringe Pump
LCD Touch Screen Controlled Infusion Syringe Pump
LCD Touch Screen Controlled Infusion Syringe Pump

 

Pressure Valve is a sophisticated plumbing device that reacts to changes in the pressure of the delivery water. Typically, both hot and cold water sources are fed into the valve, and its job is to ensure that the volume of water that leaves it is a constant mix of these two sources, even if the delivery pressure of the two sources changes. This is very important to keep the temperature of a shower constant even when the supply is not.

other valve

Pressure Valve,Brass Pressure Valve,Pressure Control Valve,Water Pressure Valve

Ningbo Jiekelong Precision Manufacturing Co., Ltd. , http://www.jklvalve.com