Isostatic Graphite are widely used in medical treatment, metallurgy, chemical, airspace, and other industries, etc. Isostatic Graphite Boat,Isostatic Graphite Sheet,Isostatic Graphite Board,Isostatic Graphite Tablets Henan Carbons New Material Technology Co., Ltd. , https://www.kygraphiteparts.com
Failure causes: 1, pump enough water; 2, pipe or instrument leaks.
Troubleshooting methods: 1, continue to pump water. 2, tighten the blockage leak.
Common Faults (B): Pump does not absorb water, the vacuum gauge shows a high degree of vacuum.
Failure causes: 1, the end of the valve did not open or blocked; 2, the resistance of the suction pipe is too large; 3 absorbent height is too high.
Troubleshooting methods; 1, correction or replacement of the bottom valve; 2, cleaning or replacement of suction pipes; 3, to reduce the water absorption height;
Common faults (C): Pump no water, pressure gauge shows pressure.
Fault causes: 1, the outlet pipe resistance is too large; 2, the rotation direction is not correct; 3, night traffic jam; 4, speed is not enough.
Troubleshooting methods: 1, reduce or shorten the water outlet pipe; 2, to correct the direction of motor rotation; 3, impeller cleaning; 4, increase speed.
Common faults (d): insufficient flow or too low head.
Fault causes: 1, the impeller or inlet and outlet pipes blocked; 2, double suction seal ring wear too much, or impeller damage, 3, the speed is lower than the specified value.
Troubleshooting methods: 1 clean the impeller or pipe; 2, replace the damaged parts; 3 adjusted to the rated speed.
We have Various kinds of graphite rods are available, such as :
1 Isostatic Graphite Rod
2 Molded Graphite Rod
3 Extruded Graphite Rod
4 Vibrating Graphite Rod
We can provide different specification quality Isostatic graphite rods.
1) Non-standard sizes can be designed and manufactured as per drawings or sample.
2) High temperature and oxidation resistance, corrosion resistance, longevity.
3) It is widely used in hot mineral and metallurgical and chemical industries.
Causes and Solutions of Common Faults in Double Suction Pumps
Common faults (a): pump is not absorbent, pressure gauge and vacuum gauge pointer violently beating.