EK-S Series Injection Molding Machine Ek-S Series Inj Molding Mach,Central Locking Toggle Injection Molding Machines,Tooth Brush Injection Molding Machine,Hydraulic Injection Moulding Machine Ningbo Jietan Machinery Equipment Trading Co., Ltd. , https://www.jietanmachinery.com
1. What are the main causes of oil spillage in tank trucks? Parts (such as side covers and thin-walled parts) are deformed at the joint surface and the housing is damaged, causing the lubricating oil to leak out.
2. After the plugs and check valves are blocked, due to the pressure difference between the inside and outside of the case, oil leakage may occur at weak sealing points.
3. The product (accessory) is of poor quality, material, or process; there is a problem with the structural design.
4. Improper assembly of high speed, with unclean surfaces, gasket damage, displacement, or failure to install according to operating specifications.
5. After long-term use, the sealing material wears too much, aging, deformation and failure.
6. Too much oil, too much oil or wrong oil.
7. Unstable tightening nuts, slip wire breaks, loose locks, etc., cause work failure.
Second, prevent oil tanker oil leakage and treatment methods
1. Avoid check valve, vent valve blocked. Due to the pressure difference between the inside and outside of the enclosure, it often causes oil leakage in the weak sealing area. Therefore, vehicles need to be regularly inspected, dredged and cleaned. As a result, the temperature in the enclosure rises, oil and gas fill the entire space, and emissions do not go out. As a result, the pressure in the enclosure increases and the lubricant consumption increases and the replacement cycle shortens. After the engine's ventilation system is blocked, the piston's movement resistance is increased and the fuel consumption is increased.
2. The joint nut of the vehicle is often disassembled and assembled, and it is easy for the slip wire to break and loosen, which can cause oil leakage. Properly solve all types of oil pipe joint seals. Replace the union nut, use a grinding method to solve the cone seal, make the nut tight and solve the seal.
3. Avoid hub throwing oil. Therefore, use the "cavity lubrication method (that is, the amount of lubrication)" to clear the ventilation hole. Wheel hub bearings and cavity too much lubricating oil, or its oil package is not properly equipped, poor quality and aging failure; brakes frequently caused by the hub temperature is too high; axle nut loose, etc. will cause the hub to throw oil.
4. Such as the oil pan or valve cover, due to the large contact area and difficult to compact, resulting in oil spills. Pay attention to the role of cushions. The gaskets between the stationary parts of the car (such as the joint end face, the housing, the cover gasket, the planar cover plate, the end caps, etc.) function as a leak-proof seal. If the materials, production quality, and installation do not conform to the technical specifications, the leak-proof function of the seal will not be achieved, resulting in accidents.
5. If the oil sump screw plug is not tightened or loosened, it will easily cause the loss of oil, and then a machine damage accident of “burning and holding the shaft†occurs. In addition, all types of fastening nuts on the vehicle must be tightened according to the specified torque. If the pressure is too tight, the gasket will leak; if it is too tight, it will cause the metal around the screw hole to bulge or screw the screw to cause oil leakage.
6. The oil seal must be replaced on time. If the improperly installed parts of the vehicle will cause discrepancies in the journal and oil seal edges, the oil spills will occur. If it is found that excessive use of the oil seal over time will affect the leakage of the vehicle and lead to oil leakage. Therefore, Chu Sheng Company warmly reminds you that this phenomenon should be promptly replaced.
How to Prevent Tanker Oil Leakage and Simple and Fast Processing Solution
Vehicles often cannot avoid accidents such as oil leakage. This will not only affect the performance of auto parts, but also directly lead to lubricating oil, fuel, and power. It will also cause pollution to the vehicle. Due to the leakage of oil and the reduction of lubricant inside the machine, resulting in poor lubrication of the parts and insufficient cooling, early damage of the parts may be caused, and even hidden accidents may be left.