The temperature sensor is used to monitor and detect changes in ambient temperature to prevent fires. It is produced by high-quality linear sensors and SMD chip processing technology. It has the characteristics of high sensitivity, stability and reliability, low power consumption, beautiful and durable, easy to use, etc. . The circuit and power supply can be self-checked, and can be simulated alarm test. The temperature sensor is suitable for relative humidity often greater than 95%, no smoke or fire, a large amount of dust, under normal conditions, there is smoke and dust retention, kitchens, boiler rooms, generator rooms, drying workshops, smoking rooms, and other smoke detectors are not suitable for installation The halls and public places of the detector.
The temperature sensor is used to monitor and detect changes in ambient temperature to prevent fires. It is produced by high-quality linear sensors and SMD chip processing technology. It has the characteristics of high sensitivity, stability and reliability, low power consumption, beautiful and durable, easy to use, etc. . The circuit and power supply can be self-checked, and can be simulated alarm test. The temperature sensor is suitable for relative humidity often greater than 95%, no smoke or fire, a large amount of dust, under normal conditions, there is smoke and dust retention, kitchens, boiler rooms, generator rooms, drying workshops, smoking rooms, and other smoke detectors are not suitable for installation The halls and public places of the detector.
Features
Self-inspection: Press the temperature sensor button, the LED of the detector is always on, and an alarm sound is emitted at the same time (Note: The self-inspection only detects the internal functions of the detector itself, and there is no relay signal output during the self-inspection).
Work: Under normal circumstances, the indicator light of the temperature sensor will flash about every 6 seconds. The temperature sensor automatically detects temperature changes in the surrounding environment. When the temperature reaches the alarm value or the temperature sudden change meets the requirements, the detector will start the sound and light alarm and start the relay output. When the temperature of the surrounding environment drops below the alarm value, the detector automatically resumes its normal working state.
Output: passive contact output; the contact capacity is 24V/1A, which can be set to normally open or normally closed contact output through the jumper inside the temperature sensor. The jumper default setting contact is normally closed when leaving the factory.
Laser Welded Finned Tubes
Laser welded finned tubes are the most technologically advanced products with irreplaceable advantages
1. The thickness of the base tube can be 0.8-1.5mm, and the thickness of the fin can be 0.3-1mm, which greatly saves the material cost compared with other processes.
2. High penetration rate, can prevent crevice corrosion, prolong service life and reduce heat transfer resistance.
3. It is easy for secondary processing, and can be directly coiled and bent.
4. Breaking through the material limitation, different materials can be used for processing.
Laser Welded Finned Tubes,Laser Welded Finned Tube,Laser Welded Spiral Finned Tube,Stainless Steel Laser Welded Finned Tube
Wuxi Mcway Equipment Technology Co., LTD , https://www.mcwayfinnedtube.com