UV ultraviolet aging test box simulates the aging degree of products under ultraviolet light, and is mainly applicable to plastics and coating industries. While testing product quality, it is also very important to ensure that a performance index of UV ultraviolet aging test chamber equipment itself is very important when testing. We should pay attention to the following points and do the appropriate measures: 1. Requirements for placing UV-ultraviolet aging test chambers are: smooth ground, well ventilated, free from flammable, explosive, corrosive gas and dust, etc.; 2. When the equipment is in a non-working condition, it should be kept dry, and the running water should be drained away, and the studio and cabinet should be dried. 3, non-professional operators, shall not operate arbitrarily; 4, require the user to configure the device with the corresponding capacity of air or power switch at the installation site; 5, due to UV ultraviolet aging test chamber radiation on personnel (especially the eyes) have a strong hazard, so operators should minimize exposure to ultraviolet light (contact time should be less than 1 minute, it is recommended that the operator with protective eyepieces and sheath; 6. The number and time of opening the door should be avoided during the test phase; 7. During the operation of the equipment, the operator should check that the water source is sufficient; 8. If the equipment has not been used for a long time, when it is used again, the water source, power supply and various parts must be carefully checked and the equipment must be restarted after confirming it is correct; 9. Appropriate maintenance space is left around the equipment to facilitate the use of operators; 10. After the UV UV aging test chamber is completed, the operator shall cover the plastic cover so as to avoid dust intrusion. If dust is found before this time, it should be removed. Data-Logging Plastic Welding Machine
Data logger plays more important role in Plastic Pipe Welding Machines. The need for better record keeping and increased accountability is growing among those who build and manage pipeline infrastructures. Data Logger/recorder installed on Plastic Pipe Butt Welder is to been implemented fusions. The Data Logger from Wuxi Yuda meets these requirements by capturing the most important information related to fusion welding operations. Data logger be equipped with RDH series hydraulic butt fusion welding machine is called RDH-JL data-logging thermofusion welders. Data Logger used in RGH series Workshop fitting welding machine is named RGH-JL Data-logging Workshop PE Fitting Fabrication Machines. These Data-logging polyethylene pipeline welding equipments are used for instructing the welding process of polyethylene pipe fusion welding and monitor, record and print welding statistics
Data Logger Welding Machine,Fusion Pipe Welder,Fusion Pipe Machine,Pe Pipe Welding Machine WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com