25254 BMW will recall

On October 13, it was reported that BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. have filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on February 17, 2014 in accordance with the requirements of the "Regulations on the Recall of Defective Automotive Products." Since then, the following defective vehicles have been recalled, totaling 25,254 vehicles:

(i) BMW Brilliance 520Li, 525Li, X1sDrive20i, and X1xDrive20i produced by BMW Brilliance Automotive Co., Ltd. from April 2, 2012 to April 22, 2013, a total of 4,083 vehicles.

(b) BMW 125i, 320i, 328i, 520i, 528i, X1 xDrive28i, X3 xDrive20i, X3 xDrive28i, Z4 sDrive20i imported from BMW (China) Automobile Trading Co., Ltd. from February 23, 2012 to August 30, 2013 The Z4 sDrive28i totaled 21,171 vehicles.

There are design flaws in the intake camshaft in the engine heads of some vehicles within the scope of this recall. When the engine is running, oil seals inside the camshaft may shift. The offset will affect the oil supply of the vacuum pump. When the oil supply is seriously lacking, the vacuum pump will be damaged due to insufficient lubrication. The damage of the vacuum pump will cause the brake assistance to decrease and there is a potential safety hazard. BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will measure the position of the seal in the intake camshaft for the vehicle within the recall range. If displacement has occurred, replace the intake camshaft; if the seal does not occur, For offset, a limiting sleeve is installed inside the intake camshaft to fix the sealing piece. To eliminate security risks.