Just like parents of parents who had just started their parents, when the children just arrived, they were always overwhelmed by the overwhelming enthusiasm of their care. The high-altitude vehicle manufacturers reminded them that infancy maintenance of aerial vehicles is actually the easiest. Because this period is generally in the factory. In the package period (generally within 60,000 kilometers of 2 years), maintenance during this period is mainly based on the time and mileage specified by the manufacturer at regular and fixed intervals. The maintenance contents basically include the replacement of “three oils and one filter†(oil , engine oil grid, gas grid, air grid). As for the replacement time, mileage and project, each model manufacturers have different recommendations, consumers simply follow the instructions for use on it. About 30,000 kilometers of aerial vehicles, to consider the replacement of spark plugs (some manufacturers shorter time requirements), the life of spark plugs are often not felt by consumers, but the spark plug as a wearing part has been much less effective than before. When the 15,000 km is recommended, the owner should clean the combustion chamber, fuel injectors, throttle, inlet, etc. to help maintain full combustion. High-altitude truck manufacturers : It is best not to go outside the designated area of ​​the factory during the Three Guarantees period. All liquids (including engine oil, brake oil, etc.) that are replaced must use the brand specified by the manufacturer. Otherwise, the manufacturers will not be given the three-pack period. The claims service, in case of problems, is not worth the candle.
Nickel Based Laser
Cladding Powder
Ni base alloy
powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has
good wettability, corrosion resistance and high temperature self-lubricating
effect, and is used in components with heat resistance, corrosion resistance and
thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser
cladding, the No means hardness of powder. Inconel 625 and 718 has good
corrosion property under higher temperature, also widely used for laser
cladding process.
Cobalt based Laser
Cladding Powder
Cobalt-based alloy
powder is the cemented carbide resistant to various types of wear and corrosion
as well as high temperature oxidation. That is, the so-called
cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based
alloy is mainly composed of cobalt, containing a considerable amount of nickel,
chromium, tungsten and a small amount of molybdenum, niobium, tantalum,
titanium, Alloying elements such as lanthanum, and occasionally a class of
alloys containing iron.
Co-based self-fluxing
alloys have good high temperature performance and wear resistance and corrosion
resistance, and are used in petrochemical power, metallurgy and other
industrial fields where they are wear-resistant, corrosion-resistant and
high-temperature resistant.
Iron based Laser
Cladding Powder
The work pieces
required for laser cladding and manufacturing in the actual industry are mainly
carbon steel and cast steel. The Fe-based alloy is close to the base material
in composition and has good wettability. The advantage of Fe base powder is
lower cost and good wear resistant of cladding layer. As a result, it`s the
most widely used for laser cladding process. It is suitable for parts that
require local wear resistance and are easily deformed.
WC blended Laser
Cladding Powder
Tungsten carbide blended with Ni alloy powder is the best
choice for wear resistant work piece. This unique process can bring excellent
wear, corrosion and high temperature resistant. Our blend powder can achieve
different portion of WC from 35% to 60% without crack under suitable cladding
parameter.
Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcthermalspray.com
Maintenance Work for Infant Cars
For many people, a car is like an old friend who has been with him for many years, but also has its own peak and trough period, when they have their own toddlers to help, but also when they are strong and very solid. Now many high-altitude vehicles After the car owner bought the car, he only knew that he did not know how to maintain the car. The “infant period†of the aerial working vehicle refers to maintenance within 50,000 kilometers after the new car is purchased.