In the use of large-scale machinery, care must be taken to ensure the efficiency of safe production. Here are some precautions to be taken in the use of CNC cutting machines: Ceramic Fiber Blankets,Ceramic Blanket,Ceramic Fiber Blanket,Insulation Baffle Fire Blanket JAR HING PRODUCTS.,LTD , https://www.jarhingproducts.com
First, to prevent electric shock 1, when the power or the machine is running, please do not touch the electrical cabinet and any electrical components within the console. Otherwise, electric shock may occur.
2. Do not operate any switch knob with wet hands to prevent electric shock.
3. Please do not energize the line or replace the electrical components. Otherwise, it may cause electric shock or injury.
4. Maintenance personnel with corresponding technical qualifications, and the equipment can be repaired only in strict accordance with the electrical maintenance technical requirements. In case of accidents.
Second, to prevent fires 1, cutting machine used for the work of raw materials for flammable gases such as acetylene, propane, liquefied petroleum gas. Therefore, it is necessary to periodically check whether the entire air path is sealed.
2. The gas source of the cutting machine should be kept away from the open flame, and place normal carbon dioxide or other appropriate fire extinguishing devices near it.
3. The operator shall timely control the fire when adjusting the fire to avoid a fire.
Third, to prevent damage 1, when the cutting machine is running, should pay attention to whether there are people or other objects in front, so as not to hit.
2. After each cutting is completed, the torch should be raised to a higher position so as not to touch the steel plate and damage the cutting torch.
3, mechanical maintenance personnel in the maintenance should ensure that the machine is stopped working. And hang up warning signs to prevent the sudden operation of the machine and human accidents.
4. When the machine is running for a long time, you must not directly touch the heat sink and other heat-generating devices on the module to avoid burns.
Fourth, the operation of attention 1, before starting the machine to check whether there is a leak in the machine line, a leakage phenomenon never boot.
2. After starting the machine, check whether there are any obstructions on the working surface and the guide rails. If there are obstacles, they must be excluded.
3, the operator can not leave the job freely, non-operators must not start the machine at will.
4. In the event of an emergency during operation, immediately press the red emergency stop switch to prevent accidents.
5, maintenance of CNC cutting machine should pay attention to the command and coordination of technicians.
6. Close all air valves before shutting down, and put the remaining air in the air.
7. If the pipeline is found to be tempered, it must be powered off immediately.
I often come to my website to learn about the production and use of CNC cutting machines. We will provide you with industry news and trends in real time, and provide guidance for manufacturers to choose a right and good machine. More attention, wonderful constantly updated.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /