Honing steels are used by lightly placing the near edge of the blade against the base of the steel, then sliding the blade away from yourself along the steel while moving it down – the blade moves diagonally, while the steel remains stationary. This should be done with the blade held at an angle to the steel, usually about 20°, and repeating on the opposite side at the same angle. This is repeated five to ten times per side Honing Rod,Cuchilleria Honing Rod,Alumina Honing Rod,Honing Steel Rod Yangzhou Yinhe Machinery Co., Ltd , http://www.yinhesteeltubes.com
"Pressure range:3-100psi,0.20-6.90bar,20-700kpa,0.2-7.05kgf/cm²
Pressure unit: psi,bar, kpa,kgf/cm²(optional)
Resolution:0.5psi/0.05bar
Back-Lit LCD and light on gauge's headÂ
Power:CR2032 3V lithium coin cell
3xAG13 battery
On/off key
Auto shut off
Accuracy:<=±1.5 psi F.S.
Product size: 13.0 x 4.5 x 2.5cmÂ
Net weight: 20g
Each in sliding blister
Dimensions of mater carton: 69 x 43 x 36.5 cm
120 pcs/ctn
G.W.: 13.5 kgs N.W.: 10.5 kgs
Â