. Turbo can not be equipped with Intercooler? . Is TURBO car equipped with Turbo Timer and Blow Off Valve? . What is TURBO Lag . What is the difference between turbo blower booster and mechanical booster? . Turbo cars do not necessarily consume a lot of fuel. Is that right?
PSA H2 generator is generally a PSA purification equipment to get pure H2 from the gas mixture with H2 as the main component.
High purity H2 Generation System
mainly comprises of Ammonia decomposition device for H2 generation.H2 pressurization system, PSA H2 Generator plus gas storage tanks....
Based on the requirement of gas production line, the
H2 source, takes liquid ammonia as the raw material, which decomposes into the
mixed gas of about 75% H2 and 25% N2 under the action of catalyst of Nickel.
This will greatly improve the reliability and randomness of the H2 system,
which make it convenient to maintain the system, to ensure the stable operation
of the main production line.
The advantage of PSA H2 Generator PSA Hydrogen Generator,Hydrogen Generator,Hydrogen Generation Plant Suzhou Xinrui Purification Equipment Co.,Ltd , https://www.gas-equipment.net
Degassing is generally referred to as Blow Off Valve. It is a special fitting for high-pressure turbo cars. Its role is to use the principle of pressure difference to release some of the pressurized air in the air intake system when you shrink the oil. This reduces the pressure on the top of the supercharger blade and makes it faster when the oil is pressed on. Turbo response.
It is also possible that Turbo engines do not have Intercooler. Many of the early TUBRO engines did not have Intercooler. However, with Intercooler, more air can enter the combustion chamber. The power of TURBO can be fully utilized.
The purpose of the TurBo Timer is to allow it to cool a bit before the engine is extinguished at high temperatures to prevent damage to the internal parts. This TIMER is helpful if people often stop idling at high speeds. However, TIMER is not necessary if the local train will pass through several minutes before each ex. As for the Blow Off Valve, it is only necessary to rush out the oil and exhaust the oil only under extreme competition. To be honest, if some parts are necessary for the car, how can the original factory not be listed as a standard device?
Turbo Lag is an engine assigned to a turbocharger. It takes a short period of time before refueling to achieve the desired power. The main reason is that the inertia of turbocharger turbocharger requires a certain amount of exhaust pressure to be sufficient. The speed will be pumped into the engine.
Turbo blower supercharger and mechanical supercharger are all applications to pressurize the air before being sent to the engine, thereby increasing the output of the engine. But their design and operation principle are different. The turbo blower boosts the power from the exhaust gas from the engine, and uses the precise turbine blades to draw the kinetic energy and heat energy of the exhaust gas to pressurize the air. This Heat Regeneration method is improved. Horsepower also improves efficiency.
The mechanical turbocharger is driven by the engine power, and the reaction is more direct than turbocharging, but it is always a device that consumes engine power. At high engine speed, the engine maximum horsepower may not be able to increase, but for the middle torque increase. It is very effective.
What is the fuel consumption of an engine? The first determining factor is the engine's displacement, the second is the rotational speed of the engine. The latter depends on the driver's driving method and the characteristics of the engine. The characteristics of the TURBO engine That is, the speed is increased quickly. No matter whether it is a low boost value or a high boost value TURBO, this is the case. When the speed is higher, the more fuel is used. The TURBO is not necessarily fuel efficient, and the focus is still on the output of the engine. If the average fuel consumption of a 2 liter TURBO engine is 10L/100KM, the performance figures are 280 and 38kgm, which is comparable to the natural amount of exhaust gas. Aspirated engines have a relatively high fuel consumption. However, if the output power is compared to that of an engine with the same power, the displacement may be three liters or even four liters or more. At this time, the fuel consumption of the two engines is reduced. Not far off, even the TURBO engine uses less fuel.
â—†Easy installation
The equipment is of compact structure, wholly skid-mounted, low space requirement without the infrastructure investment and small investment.
â—†It is more economical than other ways of H2 supply.
Pressure Swing Adsorption technology is a kind of easy and simple way to supply H2. It takes the decomposed gas from ammonia or natural gas. The energy consumed is only the electricity consumption of the H2 compressor, which endows it with such advantage of low running cost, low energy consumption and high efficiency.
â—†Integrated design of mechatronics and instrumentation makes the automatic operation realized.
Imported PLC fully controls the full automatic operation. The flow rate, pressure and purity of H2 are adjustable and can be displayed continuously; alarm of pressure, flow rate and purity can be set and remote automatic control and testing or measuring can also be realized, therefore, the unmanned operation is truly realized.
â—†Peak/Fail Safety system
Alarming and automatic start-up function of Peak/Fail back-up system can be configured for the user to ensure the safe and reliable running of the system.
â—†The high purity of components and parts is the guaranty of the stable and reliable running.
The key parts such as pneumatic valves and solenoid valves are all imported from Germany or Japan with advanced configuration. They are operated reliably with fast switching, and long service life of millions. They are of low failure rate, easy maintenance and low maintenance cost.
â—†Oxygen content can be displayed continuously, and if it is beyond the limit, there will be automatic alarming.
On-line monitoring of H2 purity to ensure the stability of the H2 purity required.
â—†High quality molecular sieve
The high quality molecular sieve has large adsorption capacity, high compressive performance with long service life. The service life of normal operation is 8 to 10 years.
â—†Advanced filling technology of molecular ensures the working life of the equipment.
Frequently Asked Questions on Cars - Turbo Boosting
What is the deflation valve?