Magnetic pump with its full seal, no leakage, corrosion-resistant features, widely used in petroleum, chemical, pharmaceutical, electroplating, environmental protection, water treatment, film and television printing, defense and other departments for pumping flammable, explosive, toxic and valuable liquid , Is to create a leak-free, non-polluting civilized workshops, civilized factories ideal pump. More keyword search: Magnetic pump alphard tail lamp,volvo s90 tail light,cadillac ats tail lights,mclaren tail light PNP Car Light & MAYLERESCAPE LIMITED , https://www.pnpcarheadlights.com
Magnetic pump installation process to take into account the following:
1. The unit on the basis of the base plate and placed between the wedge pad, wedge pad by adjusting the level to find the pump. After adjusting, tighten the anchor bolts.
2. Pump and motor should be checked before installation, all parts should be intact, magnetic pump should be no debris.
3. According to the basic size of the concrete foundation, at the same time to be buried good anchor bolts.
4. Magnetic pump suction, discharge pipe should be brackets, can not be used to support the magnetic pump. Import and export pipe diameter should be consistent with the pump import and export caliber.
5. Installation is completed, the last hand to turn the magnetic pump coupling, check whether the phenomenon of rub touch, turn the installation is completed easily.
6. Magnetic pumps are strictly prohibited with the extraction of particles and easy to crystallize the media, does not allow the closure of the discharge port in the case of continuous operation, the need to maintain a minimum flow.
7. In order to prevent debris from entering the magnetic pump, a filter should be set at the inlet, and the filtration area should be more than 3 ~ 4 times of the pipe cross-sectional area.
8. Medium viscosity is too high, the magnetic pump performance, power will change, please follow the instructions for details.
9. Must ensure that the installation of magnetic pump height in line with the pump NPSA, and consider the pipeline loss and the media temperature.