Hot Selling Hydraulic Bending Machinery

Product details

Advantages

1.Especially thick steel plate,the speed motor of the national standard,the quality is more stable.

2.adopts the fully enclosed gear box separated from the working disk for no distortions even under the condition of heavy loads and no oil leaking while lifting the machine, low noise, high and low speed.

3.Gears,gear shafts,working disk,stop gauge,saddles,pile heads and pile head bushes made of high-quality alloyed steel with proper heat treatment(quenching/tempering/high frequency)and  thick external case to ensure high performances also under heavy loads and long working life.

4.Fly  wheel and side bolts to ensure accuracy of the bending diameter also after stopping and restarting.

5.CE certification

I Amplification and advantages:
GWH32E  bending machine are reinforced bending equipments used in construction site which are researched and developed by our company. These models have the following advantages:

Integral enclosed housing which assures the moment distribution is reasonable, no local deformation phenomenon; extra strong and aggravating housing assures increased strength. Gear shaft and main spindle are made of high quality carbon steel materials; the important parts are of high standards of heat treatment.The main spindle is supported with ball bearing of high bearing capacity, handy movement and long service life, parts and components under high load conditions also have long-term safe operation.Square steel and working plate is made of high quality carbon steel, pile head and pile tip using alloy steel with high hardness heat treatment ensures long-term reliable use.Brake motor, Adjustable square steel and Bolt type positioning disc Make disc self-return, Angle adjustment is convenient, and bending angle is accurate.

After adding enough lubricating oil before using, there is no need to refuel the lubricating oil constantly in the spindle sliding sleeve like ordinary bending machine; it is convenient operation and maintenance.Bending mode is manual/automatic switching with brake motor.

II Preparation before operating:
2.1. Check
(1). The outer packing is damaged or not, whether there are damaged parts that can affect the normal use
(2). check if all nut, bolt and screw are reliable fastness.
2.2. Installation
(1). before install machine
A choose smooth and strong ground, machine keeps horizontal position.
B leave enough space to pile up raw materials.
C leave enough space of convenient transportation finished site.
D access power supply voltage must be in standard voltage + 10% range, and reliable grounding.
(2). After moving machine to work site and accessing power supply, and then do the debugging.
(3). put foot switch plug into the socket of the electric door.
 

Features

1. equip with double driving wheels

2. equip with ore-bending devices.

3. can work in clock wise and counter clock wise direction

4. also can bend flat steel, square tube and rectangular tube after replacement of driving wheel

 

FAQ

Q:What's the usually delivery terms?
A:FOB, CNF, CIF, Exworks will be ok.

Q:What's the MOQ?

A:1 Sets.1 set for sample is OK, but there would be extra port and delivery charges.

Q:What's the payment terms?

A:We accept Cash, T/T, L/C.

Q:What's your delivery port?

A:Usually Qingdao Port, Tianjin, Shanghai or other port of China.

Q:What's your packing?

A:Iron frame and Plywood cases or carton.

Q:Can I change the motor to my local voltage and frequency,is there any extra charge?

A:Yes, we can supply motor with frequency and voltage according to local standard. Such as
220V/380V/410V/415V/440, and 50HZ/60HZ 3 Phases without extra charge.

Q:Can we place OEM orders?

A:Yes, OEM orders are acceptable, We can manufacture machines according to your 
requirements:such as design, logo, color, material or brand information.

Q:Does machines have warranty period?

A:Yes, our machine with one year warranty period for main parts, quick parts are excluded.

Q:Does machine have certificates?

A:Yes, Our machine had qualified CE and ISO9001 Certificates.

 

 

 

Product details

Advantages

1.Especially thick steel plate,the speed motor of the national standard,the quality is more stable.

2.adopts the fully enclosed gear box separated from the working disk for no distortions even under the condition of heavy loads and no oil leaking while lifting the machine, low noise, high and low speed.

3.Gears,gear shafts,working disk,stop gauge,saddles,pile heads and pile head bushes made of high-quality alloyed steel with proper heat treatment(quenching/tempering/high frequency)and  thick external case to ensure high performances also under heavy loads and long working life.

4.Fly  wheel and side bolts to ensure accuracy of the bending diameter also after stopping and restarting.

5.CE certification

I Amplification and advantages:
GWH32E  bending machine are reinforced bending equipments used in construction site which are researched and developed by our company. These models have the following advantages:

Integral enclosed housing which assures the moment distribution is reasonable, no local deformation phenomenon; extra strong and aggravating housing assures increased strength. Gear shaft and main spindle are made of high quality carbon steel materials; the important parts are of high standards of heat treatment.The main spindle is supported with ball bearing of high bearing capacity, handy movement and long service life, parts and components under high load conditions also have long-term safe operation.Square steel and working plate is made of high quality carbon steel, pile head and pile tip using alloy steel with high hardness heat treatment ensures long-term reliable use.Brake motor, Adjustable square steel and Bolt type positioning disc Make disc self-return, Angle adjustment is convenient, and bending angle is accurate.

After adding enough lubricating oil before using, there is no need to refuel the lubricating oil constantly in the spindle sliding sleeve like ordinary bending machine; it is convenient operation and maintenance.Bending mode is manual/automatic switching with brake motor.

II Preparation before operating:
2.1. Check
(1). The outer packing is damaged or not, whether there are damaged parts that can affect the normal use
(2). check if all nut, bolt and screw are reliable fastness.
2.2. Installation
(1). before install machine
A choose smooth and strong ground, machine keeps horizontal position.
B leave enough space to pile up raw materials.
C leave enough space of convenient transportation finished site.
D access power supply voltage must be in standard voltage + 10% range, and reliable grounding.
(2). After moving machine to work site and accessing power supply, and then do the debugging.
(3). put foot switch plug into the socket of the electric door.
 

Features

1. equip with double driving wheels

2. equip with ore-bending devices.

3. can work in clock wise and counter clock wise direction

4. also can bend flat steel, square tube and rectangular tube after replacement of driving wheel

 

FAQ

Q:What's the usually delivery terms?
A:FOB, CNF, CIF, Exworks will be ok.

Q:What's the MOQ?

A:1 Sets.1 set for sample is OK, but there would be extra port and delivery charges.

Q:What's the payment terms?

A:We accept Cash, T/T, L/C.

Q:What's your delivery port?

A:Usually Qingdao Port, Tianjin, Shanghai or other port of China.

Q:What's your packing?

A:Iron frame and Plywood cases or carton.

Q:Can I change the motor to my local voltage and frequency,is there any extra charge?

A:Yes, we can supply motor with frequency and voltage according to local standard. Such as
220V/380V/410V/415V/440, and 50HZ/60HZ 3 Phases without extra charge.

Q:Can we place OEM orders?

A:Yes, OEM orders are acceptable, We can manufacture machines according to your 
requirements:such as design, logo, color, material or brand information.

Q:Does machines have warranty period?

A:Yes, our machine with one year warranty period for main parts, quick parts are excluded.

Q:Does machine have certificates?

A:Yes, Our machine had qualified CE and ISO9001 Certificates.

 

 

 

Rotary Arm, 2-Arm Rotary, 3-Arm Rotary, 4-Arm Rotary.

Spray Bar

Nozzle Rotary Bar,Female Rotary Arm,Degree Rotary Arm,Aluminum Rotary Bar

NINGBO HAISHU OMWAY MACHINERY FACTORY (OMW Industrial) , http://www.omwindustrial.com