Starter Components 61-139, Im3178, 132685, Wsa59037, 10456406 Car Motor Armature

As a professional supplier with over 10 years experience in the field of auto parts, we can supply over 3,000 different alternators and starters, and over 20,000 associated components.

•Ensures cranking and starting performance under all temperature extremes

•100% full-load tested - meets or exceeds OE manufacturers' torque, amperage draw and RPM standards

•Ensures stable voltage output, eliminates shorts and open circuits

•Provides unsurpassed reliability under extreme conditions

•OE design to ensure exact fit, form, and function

•Tested in an endurance simulaor to ensure OE quality and function

As a professional supplier with over 10 years experience in the field of auto parts, we can supply over 3,000 different alternators and starters, and over 20,000 associated components.

•Ensures cranking and starting performance under all temperature extremes

•100% full-load tested - meets or exceeds OE manufacturers' torque, amperage draw and RPM standards

•Ensures stable voltage output, eliminates shorts and open circuits

•Provides unsurpassed reliability under extreme conditions

•OE design to ensure exact fit, form, and function

•Tested in an endurance simulaor to ensure OE quality and function

Airless Spray Gun
This process occurs when paint is applied to an object through the use of an air-pressurized Spray Gun. The Sprayer Gun has a nozzle, paint basin, and air compressor. When the trigger is pressed the paint mixes with the compressed air stream and is released in a fine spray.


Types of nozzles and sprays
Due to a wide range of nozzle shapes and sizes, the consistency of the paint can be varied. The shape of the workpiece and the desired paint consistency and pattern are important factors when choosing a nozzle. The three most common nozzles are the full cone, hollow cone, and flat stream.There are two types of air-gun spraying processes. In a manual operation method the air-gun sprayer is held by a skilled operator, about 6 to 10 inches (15–25 cm) from the object, and moved back and forth over the surface, each stroke overlapping the previous to ensure a continuous coat.In an automatic process the gun head is attached to a mounting block and delivers the stream of paint from that position. The object being painted is usually placed on rollers or a turntable to ensure overall equal coverage of all sides.

Airless Spray Gun

Airless Spray Gun,Airless Paint Spray Gun,Paint Spray Gun,Spray Gun

Fuzhou HVBAN Mechanical Equipment Co., Ltd. , https://www.hi-sprayer.com