Steel Coil Slitting Machine I. Main technical parameters       Steel Coil Parameters            Slitter Parameters      Slit Parameters        Other Parameters         II. Overflow From right to left are: Entry coil car→Decoiler →Press and pinch device→Hydraulic cutter→Looper 1→Side guide device→ Slitter→Scrap winder→Looper 2→Tension stand →Recoielr→Exit coil car Name Entry coil car Hydraulic Decoiler Hydraulic Press and pinch device Hydraulic cutter Looper 1 Side guide device Slitter Scrap winder Looper 2 Tension stand Recoiler Exit coil car Hydraulic system Electrical system   Bulk cement tank trailer(Bulk Cement Trailer),Composition of parts is trailer chassis, bulk cement tanks, gas line system, automatic discharge device and other components. Suitable for fly ash, cement, lime powder, mineral powder, granules alkali and other particle diameter of not more than 0.1mm powder dry materials transported in bulk. Mainly for cement, cement sotre and large construction sites, can save a lot of packaging materials and handling labor.
Bulk Powder trailer body mainly by the cylinder, the upper end of the tank to the feed opening, fluidized bed, the discharge tube assembly, the intake pipe and other accessories.Top of the tank is divide to two or three compartment.
Walkway department is Tri-Axle trailer, traction Pin, landleg,12 pcs tire, tool box and so on Bulk Cement Semi Trailer,Cement Semi Trailer,Bulk Cement Tanker Trailer,Bulk Powder Tanker Trailer,Bulk Cement Trailer Suizhou lishen special vehicle co.,ltd , https://www.ls-truck.com
Material
Carbon steel(4mm) and SS(2mm)
Tensile strength
δb≤450Mpa,δS≤260Mpa
Steel thickness
0.4-4.0mm
Steel widthÂ
500-1600(Max)
Steel coil I.DÂ
φ508mm
Steel coil O.DÂ
φ2000mm(Max)
Steel coil weight
25T(Max)
Knife pivot diameter
φ220mm
Knife pivot material
40Cr
Blade specification
φ220×φ360×20mm
Blade Material
6CrW2Si
Max slit quantity
5 pcs (4mm); 20pcs(0.4mm)
Width precision
≤±0.05mm/2M
Power
380V/50Hz/3Ph
Line speed
0-100m/min
Capacity
About 250 Kw
Whole line Dimension
25m(L)X8m(W)
Operator needed
1.mechanical engineer ,2.common workers
Line direction
From right to left(Face to machine)
III. Composed device
Quantity
1 unit
1 pair
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 set
1 set
High Speed Slitting Line
Model NO.: 0.4-4.0MM Thickness
Max Slit Quantity: 5 PCS (4mm) ,20 PCS(0.4mm)
Trademark: SAIBO
Transport Package: Sea Packing
Specification: CE SGS
Origin: China
HS Code: 84552210