Compared with the old standards, the new standards focus on strengthening the inspection and inspection of key vehicles such as large and medium-sized passenger cars, heavy and medium-sized trucks, dangerous goods transport vehicles, and school buses. At the same time, the outer dimensions and the quality of the registered trucks are strictly controlled. Plastic Eyelet,Dark Coffee Curtain Eyelet,Bright Silver Curtain Eyelet,Green Bronze Curtain Eyelet Shaoxing Fuli Import&Export Co.,Ltd , https://www.fulicurtainaccessories.com
Strict implementation of the new standards for the appearance of dimensions inspection, for the total quality of the trucks and trucks with a total mass of 4,500 kg or more (ie medium and heavy) modified trucks and trucks, all low-speed cars, trailers, dangerous goods transport vehicles, the outline size, Inspection requirements for axle count, wheelbase and tire specifications.
The length, width and height of the vehicle shall be consistent with the values ​​stated on the relevant certificates of the motor vehicle ex-factory certificate; the allowable range of the outer dimensions parameter tolerance shall be plus or minus 1% for the automobile (except for low-speed vehicles) and the trailer. For example, a truck with a length of 10 meters and a width of 2.5 meters can not exceed 10 cm in length and 2.5 cm in width.
One of the spare tire tanks can not be used for the special work vehicles and trailers modified for all trucks and truck chassis, and the inspection requirements for the quality of the preparation are clearly defined. The quality error of all trucks, trailers and special work vehicles is not more than plus or minus 3%. The quality of the whole set is commonly called the empty car quality. The spare tires and tools are required to be installed. The weight of all kinds of oil and water is filled. In the case of deliberate reduction of weight, the key inspections are not met and cannot be passed.
Eliminate dealers' weight gain and weight reduction "In the past, the standard only made demands on manufacturers. The relevant departments of the public security department did not have law enforcement basis. Some vehicles went to the line to "weight loss" and went offline to "weight gain" in order to evade inspection." After loading more, after the manufacturer leaves the factory, the dealer thickens the steel plate and so on, from several tons to more than ten tons. Now the new standard has also stipulated the relevant departments of the public security. Vehicles that do not meet the factory regulations when inspecting vehicles are unable to register, so that the manufacturers must produce according to the standard, the sellers cannot install and modify them, and the users are not allowed to go online. To further eliminate the overload of trucks.
Editor's note:
The Chengdu area has been strictly supervised since July 1st last year. The new regulations for new car inspections are stricter than ever. In the future, new car users will no longer be able to cope as they did before. It is considered to be at the source to prevent the overload of the truck.