Diaphragm Pump The system consists of one or more double-sided pumps, such as an air-driven dual diaphragm pump. The manifolds on the pump are separated so that each side of the pump pumps out one of the multi-component materials, and an accumulator is connected to the outputs on both sides to bring the out-of-phase output of the pump into the same phase. Diaphragm isolation valves are available on each side of the pump outlet to prevent mixed material backflow. If you need a mixing ratio other than 1: 1, you can use more than one of these pumps together to achieve a variety of mixing ratio. Pulverizers are machines that pulverize large solid materials to the required size. Pulverizer Machine,Crushing Machine,Milling Machine,Grinding Mill, Grinding Machine JIANGYIN CITY XUAN TENG MACHINERY EQUIPMENT CO.,LTD , https://www.xuantengmachine.com
Diaphragm failure monitoring system to detect diaphragm diaphragm leaks. The system includes a pump having a working chamber containing working fluid, a pumping chamber for pumping material into and out of the pump, and a diaphragm to isolate the working chamber from the pumping chamber. A first optical fiber is connected to the working chamber for transmitting an optical signal through the working fluid. A second optical fiber is connected to the working chamber for receiving the optical signal transmitted by the first optical fiber. An electrical signal establishing means establishes a first electrical signal when an optical signal is transmitted from the first optical fiber through the uncontaminated working fluid to the second optical fiber. The electrical signal establishing means establishes a second electrical signal when the optical signal is transmitted from the first optical fiber and passes through the polluted working fluid to the second optical fiber. When the second electrical signal is established, the problem of leakage of contaminated material through the diaphragm into the working chamber can thus be detected.
Diaphragm pump diaphragm installation method, it does not affect the pump volume change requirements, but also make full use of diaphragm excellent compression performance, the geometry of the diaphragm carried out, it has without adding any cost and workload, and Greatly improve the service life of the diaphragm, to ensure the normalization of production and improve product quality, it can be applied to a variety of diaphragm pump diaphragm installation.
According to the size of the crushed material or the crushed material, the mill can be divided into coarse crusher, medium crusher, fine mill and superfine mill. There are four kinds of external forces applied to the solid in the grinding process: pressing, cutting, impact and grinding. Press rolling is mainly used in coarse and medium crushing, suitable for the crushing of hard materials and bulk materials. Shearing is mainly used in fine crushing, suitable for the crushing of ductile materials. Impact is mainly used in medium crushing, fine grinding, ultrafine grinding, suitable for crushing brittle materials. Grinding mainly in fine grinding, ultrafine grinding, suitable for small pieces and fine particles.
The crusher makes use of the high speed relative motion of the movable tooth plate and the fixed tooth plate, so that the crushed object can be crushed by the comprehensive action of tooth impact, friction and the impact between the materials. The crusher is suitable for crushing Chinese herbs, precious medicinal materials, ores and chemical raw materials in small batches in various varieties, alloys, metallurgy, geology, scientific research and other units.
The pulverizer machine has the advantages of simple structure, solid, stable operation and good crushing effect. The pulverized material can be discharged directly from the grinding chamber of the main machine. The particle size can be obtained by replacing the mesh screen with different aperture. The powder collecting chamber adopts the completely closed silencer structure, which can effectively reduce the working noise. In addition the machine is all stainless steel. The inner wall of the casing is machined to achieve smooth surface, which changes the phenomenon of rough inner wall and powder accumulation of the previous models, so that the production of drugs, food, chemical industry and so on is more in line with national standards and meet the requirements of GMP.