Xigong Chusheng drought-resistant sprinkler maintenance, chassis care is most likely to be neglected by the driver friends, but the importance of the maintenance of the chassis in the winter or wet weather is very obvious. In the winter, it is necessary to thoroughly clean the chassis and prevent rust. First of all, the chassis should be thoroughly cleaned. If there is too much mud on the chassis, it must be washed again with an oil-removing detergent to expose the chassis to the original “natural†color so that the rust preventive care can be started. In a professional beauty shop, the sprinkler can be lifted to a lifting rack for chassis cleaning, wiping, and rust preventive care. In the middle of this should pay attention to, after the cleaning must be sure to wait until the water on the plate after the dry, in order to carry out anti-rust care. When performing care, be sure to maintain a uniform spray coating to form a durable layer of uniform anti-rust coating. After the completion of all the natural air drying 5-10 minutes, the chassis rust treatment is completed. After the professional chassis care is done, it does not mean that it is completely foolproof. There is a misunderstanding that people often wash the car by themselves in order to love the car, and often add some detergents. Please be careful not to use alkalinity. Cleaner, washing powder, etc. Rinse the body and chassis, otherwise it will affect the anti-rust effect and shorten the anti-rust time.  Xigong Chu Sheng drought-resistant sprinkler chassis damage first-aid square When the sprinkler truck is damaged from the vehicle repair location and the chassis components are damaged, the following emergency methods can be used to drive the vehicle to the repair condition for different fault conditions.  Brake cylinder leakage brake fluid or the branch pipeline broken, can be used in the branch of the pump pipe with tin, copper skin to be a small mat, block the pipeline, and then tighten the screws, or the fracture flat, The curling is blocked, so that the wheel can not be used as a brake. However, doing so may cause unilateral braking, and should pay attention to safety when driving.  The brake master cylinder lacks brake fluid and can be replaced by alcohol or liquor. In special cases, fresh water can be used instead. Brake cups rise and the soaked skin cups are soaked in hot water for 10 minutes to 20 minutes to remove the oily components from the bowl so that the cups can be restored to their original size.  The clutch friction plate is ablated and slippery, and the friction plate that is less severe for ablation can be turned over. If the ablation is severe, several layers of cotton or canvas may be used, and the wire or wire may be passed through the hole in the steel sheet to fix it. When driving a vehicle, it should be done steadily and the gear shifts quickly. Double-wall Corrugated Pipe Extrusion Line Double-Wall Corrugated Pipe Extrusion Line ,Double Wall Corrugated Pipe Machine,Corrugated Pipe Extrusion Machine,Double Wall Corrugated Dwc Pipe Extruder Machine Hitech Intelligent Machinery(Ningbo)Co., Ltd. , https://www.machinehitech.com