New Model Mini Laser Welding Machine/Laser Printing Machine for Jewelry

Model NO.: NL-JW300
Aimed at Positioning: CCD and Red Light
Electricity Demand: 220V /50Hz /40A
Holistic Power: 4.5kw
Cooling: Water
Trademark: Nine
Specification: CE
Origin: China
HS Code: 8501109101
Model NO.: NL-JW300
Aimed at Positioning: CCD and Red Light
Electricity Demand: 220V /50Hz /40A
Holistic Power: 4.5kw
Cooling: Water
Trademark: Nine
Specification: CE
Origin: China
HS Code: 8501109101
Introduction:
This welder is specially developed for laser welding of jewelry by HaiNuoxin and mainly used in perforating and spot welding of gold and silver jewelry. The laser spot welding is an important aspect of laser process technology application. The spot welding process is thermal conduction, i. e. The laser radiation heats the surface of work piece, and the surface heat diffuses to the interior through thermal conduction and melts the work piece by controlling the width, energy, peak power and repeating frequency of laser pulse to form specific molten pool. Because of its unique advantage, it is widely used in the process of gold and silver jewelry and welding of mini and small parts.

Features:
1.The energy, pulse width, frequency and light spot size can be adjusted in a large range   to realize different welding effects.
2.The parameters are adjusted by the lever in the seal cavity, which is simple and highly efficient.
3.Ceramic converging cavity is imported from the Britain. It is corrosion resistant and high temperature resistant, and has 8-10 years service life. The life of xenon lamp is more than 8 million times.
4.Use the most advanced light shielding system to eliminate the irritation to eyes by light during working.Able to work for 24 hours continuously; Stable performance; Free of maintenance in 10, 000 hours.
5.Human-based design accords with ergonomics, avoiding fatigue after long time working.

Advantage:
High speed, high efficiency, deep, small deformation, small heat effect area, high welding quality, pollution free welding spot, environmental friendly.

Parameters:
Model  NL-JW2OO
NL-JW3OO
Max laser  Power Output 200W
300W
Wavelength 1064nm
Laser Spot Adjust Range 0.1-2.0mm
Pulse Width ≤20ms
Welding Frequency 0-40HZ
Aimed at Positioning Red Light,CCD(optional)
Electricy Demand 220V±5%/50HZ/40A
Holistic Power 4.5KW
6KW
Cooling Water
Using Environment Clean and dust-free source;13ºC-28ºC,Humidity5%-75%


Application:
Widely used in aviation, aerospace, sports products, jewelry, golf head, medical instrument, titanium alloy denture, instrument, electronics, machinery, automobile, etc, especially for the perforating of gold and silver jewelry, spot welding, repairing, inlay and welding of claw.

Picture:
New Model Mini Laser Welding Machine/Laser Printing Machine for Jewelry
After-service:
1.User-friendly English manual and video CD for machine using and maintaining
2.My company English software can do all kinds of patern recognition ,software upgrading and updating and updating free
3.All product has 12 months warranty ,we can provide technical support even after the warranty

Exhibition
New Model Mini Laser Welding Machine/Laser Printing Machine for Jewelry


Warmly welcome to visit our factory and AGENTS WANTED in the world Introduction:
This welder is specially developed for laser welding of jewelry by HaiNuoxin and mainly used in perforating and spot welding of gold and silver jewelry. The laser spot welding is an important aspect of laser process technology application. The spot welding process is thermal conduction, i. e. The laser radiation heats the surface of work piece, and the surface heat diffuses to the interior through thermal conduction and melts the work piece by controlling the width, energy, peak power and repeating frequency of laser pulse to form specific molten pool. Because of its unique advantage, it is widely used in the process of gold and silver jewelry and welding of mini and small parts.

Features:
1.The energy, pulse width, frequency and light spot size can be adjusted in a large range   to realize different welding effects.
2.The parameters are adjusted by the lever in the seal cavity, which is simple and highly efficient.
3.Ceramic converging cavity is imported from the Britain. It is corrosion resistant and high temperature resistant, and has 8-10 years service life. The life of xenon lamp is more than 8 million times.
4.Use the most advanced light shielding system to eliminate the irritation to eyes by light during working.Able to work for 24 hours continuously; Stable performance; Free of maintenance in 10, 000 hours.
5.Human-based design accords with ergonomics, avoiding fatigue after long time working.

Advantage:
High speed, high efficiency, deep, small deformation, small heat effect area, high welding quality, pollution free welding spot, environmental friendly.

Parameters:
Model  NL-JW2OO
NL-JW3OO
Max laser  Power Output 200W
300W
Wavelength 1064nm
Laser Spot Adjust Range 0.1-2.0mm
Pulse Width ≤20ms
Welding Frequency 0-40HZ
Aimed at Positioning Red Light,CCD(optional)
Electricy Demand 220V±5%/50HZ/40A
Holistic Power 4.5KW
6KW
Cooling Water
Using Environment Clean and dust-free source;13ºC-28ºC,Humidity5%-75%


Application:
Widely used in aviation, aerospace, sports products, jewelry, golf head, medical instrument, titanium alloy denture, instrument, electronics, machinery, automobile, etc, especially for the perforating of gold and silver jewelry, spot welding, repairing, inlay and welding of claw.

Picture:
New Model Mini Laser Welding Machine/Laser Printing Machine for Jewelry
After-service:
1.User-friendly English manual and video CD for machine using and maintaining
2.My company English software can do all kinds of patern recognition ,software upgrading and updating and updating free
3.All product has 12 months warranty ,we can provide technical support even after the warranty

Exhibition
New Model Mini Laser Welding Machine/Laser Printing Machine for Jewelry


Warmly welcome to visit our factory and AGENTS WANTED in the world

Angle Cutting Saw

Angle Cutting Saw is used for HDPE, PVC, PP,PVDF pipes and fittings cutting, The Bandsaw Machines for Workshop are important cutting equipment for hdpe fitting fabrication preparation. In order to make hdpe elbow, tee,cross and wye fittings fabrication in workshop, this band saw must be multi-angle cutting with cutting angle 0-67.5° . It should have high angle precision for band saw machines to make accurate angle fitting fabrication. Wuxi Yuda has the ideal Angle Cutting equipment from 40-2600mm to match hdpe fittings fabrication machine. A table saw excels in cutting through bigger plastic pipes or thick plastic blocks. The best saw for cutting plastic pipe in angle can choose from DQJ series Multi-angle pipeline cutting machine. for example, DQJ315 Multi-angle HDPE Pipe Cutting Machine, DQJ630 & DQJ800 Plastic Pipe Band Saws, DQJ1200, DQJ1600 Band Saw Machines and DQJ2600 Poly Pipe Angle Cutting Saw. If for automatic cutting mode, you can choose DQJ-A series Automatic Plastic Cutting Equipment.

Angle Cutting Saw,Band Saw Cutting,Bandsaw Machine,Plastic Pipe Cutter

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com