Stainless Steel Railing Post,Stainless Steel Balustrade Posts,Stainless Steel Wire Balustrade Posts,Stainless Balustrade Posts DONGYING SHENGYU METAL PRODUCT CO.,LTD , https://www.sycastingprocess.com
Collector brushes: If the brush is found to be loose or the wear is deflected, the cause should be ascertained and dealt with promptly. Wuhan Tianli Electric Co., Ltd. can design custom-made special slide wires and current collectors.
Collectors: Check at least once every quarter. Focus on checking the fasteners for looseness, displacement and wear of plastic parts and moving parts. Check the spring tension (the contact between the collector phone and the guide rails should be kept under certain pressure. If any problems are found, replace them in time.)
Connector: Check at least once every six months. Focus on checking whether the fastening bolts, welds and supports are loose, corroded, or displaced. If any problems are found, replace them in time.
Daily inspection: Check whether the straightness of the track has obvious deviation (>20mm), misalignment, whether the insulation protection is detached, broken or damaged, whether the stainless steel “V†groove is tilted, and whether there is foreign matter and conductive dust on the track. Wait. If necessary, check whether the insulation resistance meets the requirements (interphase insulation resistance should be ≥10M?).
In particular, daily inspections and maintenance must be strengthened for environments where track alignment, track distance, and inclination are large, use is frequent, workshop dust is too large, temperature is high, and water, acid, alkali, fog, and outdoor use environments are used.
Wuhan Tianli various types of collectors introduced:
Collector TLDJ-J (Light Security) 100A250A500A
Current collector TLGH-J (high temperature steel body) 600A1200A
Collector TLGJ-J (tube safety)
Collector TLWJ-J (seamless) 30A-140A
Wuhan Tianli Electric Co., Ltd. is the earliest company in China to develop and produce gliders. After more than ten years of domestic promotion, the number of applications of gliding lines throughout the country is beyond the reach of other regions and enterprises. With such a wide range of applications, it has played a decisive role in the market brand of Wuhan Tianli Tactile Line, creating the status of Wuhan Tianli Trolley Line brand in China. Its recommendations on the maintenance and maintenance of sliding wires, trolley wires, and current collectors are very specific and are worthy of attention and application.
How to maintain and maintain the trolley wire (slip line)
During the use of the safety trolley line, it is very important to strengthen maintenance. Many users of the trolley line system do not frequently maintain or properly maintain the inverter and cause frequent failures, affecting normal production. As we all know, the trolley wire produced by Wuhan Tianli Electric Co., Ltd. is a German company that introduced German technology. It is a leading company in the trolley line industry. The trolley wire produced by Wuhan Tianli has a large market share in many fields in China. Part of the proportion, in the same price, Wuhan Tianli Tactile Line is among the best in both quality and cost performance. In order to ensure the normal operation of the trolley line and extend its service life, the service center of Wuhan Tianli Electric Co., Ltd. is based on more than ten years of experience, summed up the daily maintenance and maintenance of the trolley line, and hopes to share with the users, as follows: