Heavy Duty 105mm Spindle Bore Metal 3000mm Lathe

  • Model NO.: CA6261
  • Max. Swing Over Bed: 500mm
  • Max. Swing in Gap: 720mm
  • Effective Gap Length: 210mm
  • Width of Bed: 400mm
  • Color: Customeried
  • Transport Package: Wooden Cases
  • Origin: Shandong
  • Name: Heavy Duty 105mm Spindle Bore Metal 3000mm Lathe
  • Max. Swing Over Carriage: 300mm
  • Spindle Hole: 52mm
  • Max. Length of Work Piece: 3000mm
  • Section of Turning Tool: 25mm X 25mm
  • Trademark: UNITECH
  • Specification: CE, ISO9001
  • HS Code: 84581900
Heavy Duty 105mm Spindle Bore metal 3000mm Lathe

Features:
This series machine is suitable for turning inside and outside the cylinder, cone and other surface of revolution. Cutting all kinds of the metric system, the inch thread, the modulus and the, and and can perform drilling, etc.
Structure features:
1. CA series products, with "A" type as the base type, derive several deformation products. B: spindle diameter 80 mm, type C: spindle diameter 104 mm. F: hydraulic copying. M type: precise.
2. The lathe bed width in the general lathe, has high rigidity, guide surface after medium frequency quenching, durability.
3. The machine tool operation spirit concentration and skateboard has fast moving mechanism. Using single handle visualization operation, should be good human nature.
4. The machine tool structure stiffness and transmission stiffness were higher than the general lathe, high power efficiency, suitable for high speed cutting. Main shaft aperture is large, can choose accessories complete.
Heavy Duty 105mm Spindle Bore Metal 3000mm Lathe

Detailed Specifications of Heavy Duty 105mm Spindle Bore metal 3000mm Lathe
Heavy Duty 105mm spindle bore diameter 3000mm length Lathe Machine CA6140 CA6240
CA6140B CA6240B		 CA6150 CA6250
CA6150B CA6250B
CA6150C CA6250C		 CA6161 CA6261
CA6161B CA6261B
CA6161C CA6261C		 CA6166 CA6266
CA6166B CA6266B
CA6166C CA6266C		 CA6180 CA6280
CA6180B CA6280B
CA6180C CA6280C
Max. Swing over bed 400mm 500mm 610mm 660mm 800mm
Max. Swing over carriage 210mm 300mm 370mm 400mm 540mm
Max. Swing in gap ---- 630mm ---- 720mm ---- 830mm ---- 880mm ---- 1020mm
Effective gap length ---- 210mm ---- 210mm ---- 210mm ---- 210mm ---- 210mm
Max. length of work piece 500mm or 750mm or 1000mm or 2000mm or 2200mm or 3000mm or 4000mm
Width of bed 400mm
Section of turning tool 25mm x 25mm
Spindle hole 52mm (80mm)[ Φ 105]
Spindle taper Morse No. 6(MT6)( Φ 90 1: 20)[ Φ 113 1: 20]
Number of feeds 64kinds (for each)
Range of metric threads (kinds) (1-192mm) (44 kinds)
Range of inch threads (kinds) (1-24tpi) (21 kinds)
Range of module threads (kinds) 0.25-48(module 39 kinds)
Range of pitch threads (kinds) 1-96DP (37 kinds)
Max. tailstock spindle travel 150mm
Tailstock spindle diameter 75mm
Taper of tailstock spindle center hole MT5
Main motor 7.5kw (10HP)

Standard accessories                                                 
3-Jaw chuck, 4-Jaw chuck,
steady rest, follower rest, face plate,
longitudinal automatic trip, coolant system,
brake system,thread index (dial),
Dead center, Oil gun, Leviling pads,
Drive plate, operation manual

Optional accessories
DRO 
Quick change toolpost 
Chuck protection 
Leading screw guard 
Toolpost protection

Detailed pictures:
Heavy Duty 105mm Spindle Bore Metal 3000mm Lathe
Heavy Duty 105mm Spindle Bore Metal 3000mm Lathe
Heavy Duty 105mm Spindle Bore Metal 3000mm Lathe

We also would like to let you know our warranty about our Heavy Duty 105mm spindle bore diameter 3000mm metal Lathe as following:
 
What about the spare part if Heavy Duty 105mm Spindle Bore metal 3000mm Lathe break down? 
==about the machine break down, normally our policy will be as the under way
1) Our quality guarantee time is 12 months since the machine on board 
2) During this period, if the machine break down owing our machine itself quality problem,  we will prepare the spare parts and send to you by free within 5 days. all these will be by free. 
3) If the break down is caused by the mis operation,  we of course will supply you the spare parts, but we have to charge you the costs prices.

Welcome to contact us!
Canthy Guo
Tengzhou Uni-tech Co. Ltd
Tel:0632-5810216
Ph:0086-18266249928
 
 
 

Steel Fibers

Anchors for kilns are skeletons that support refractory linings or refractory prefabricated blocks of thermal equipment to enhance refractory linings against static load, thermal stress, mechanical expansion, and mechanical vibration. A few anchor manufacturers lack research on the working conditions of the parts used by the anchors, and have misunderstandings about the quality and material of the anchors. Some even consider the manufacturing cost unilaterally, cut corners, and ignore the service life and interests of the user's equipment.

Steel Fibers,Stainless Steel Kiln Anchor,304 Stainless Steel Anchor,High Temperature Anchors

Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com