Welding Cemented Carbide and Steel Parts of Expanded Mesh Metal Machine

After years of researching, we gathered a good knowledge of Vacuum Welding between carbide and steel on a relatively big area , we know how to release  the Inner stress of Welding to improve the Welding Quality.

 

Our this items is a new type of Heat resisting brick mould, adopted vacuum welding between carbide and steel technology. Currently we use adhesive technology to connect the carbide part and steel part, while the carbide is easy to get off from the steel after servral time making goods. One set mould for making trick should be used for 50000times, which would waste much time to make face milling grinding for the mould. Our new moulds technology solve this problem perfectly.

 

The advantages for  Vacuum welding carbide and steel die

 

The combination of carbide and steel material, meet the feature of moulds, such as wear resistance, heat resistance and strengths requirements, as well as long life. As a part of mould, steel saves the production cost effectively.

Vacuum welding carbide and steel die are used as the wear part of the mould, mainly for the mould of brick making.

After years of researching, we gathered a good knowledge of Vacuum Welding between carbide and steel on a relatively big area , we know how to release  the Inner stress of Welding to improve the Welding Quality.

 

Our this items is a new type of Heat resisting brick mould, adopted vacuum welding between carbide and steel technology. Currently we use adhesive technology to connect the carbide part and steel part, while the carbide is easy to get off from the steel after servral time making goods. One set mould for making trick should be used for 50000times, which would waste much time to make face milling grinding for the mould. Our new moulds technology solve this problem perfectly.

 

The advantages for  Vacuum welding carbide and steel die

 

The combination of carbide and steel material, meet the feature of moulds, such as wear resistance, heat resistance and strengths requirements, as well as long life. As a part of mould, steel saves the production cost effectively.

Vacuum welding carbide and steel die are used as the wear part of the mould, mainly for the mould of brick making.

Crawler Chasis

The feature of rubber tracks
(1). Less round damage
Rubber tracks cause less damage to roads than steel tracks and less rutting of soft ground than either steel tracks of wheel products.
(2). Low noise
A benefit to equipment operating in congested areas, rubber track products less noise than steel tracks.
(3). High speed
Rubber track permit machines to travel at a higher speed than steel tracks.
(4). Less vibration
Rubber tracks insulate machine and operator from vibration, extending the machine's lifetime and lowering operate fatigue.
(5). Low ground pressure
The ground pressure of rubber tracks equipped machinery can be fairly low, about 0.14-2.30 kg/ CMM, a major reason for its use on the wet and soft terrain.
(6). Superior traction

The added traction of rubber, track vehicles permits them to pull twice the load of wheel vehicles of the sane weight.

Application and Features:

1. Suitable for the small wheelchair.

2. Can load weight about300-400KG

3. Length can be adjusted.

4. Sprocket is available.

Characteristics of rubber track:

1). Less damage to the ground surface

2). Low noise

3). High running speed

4). Less vibration;

5). Low ground contack specific pressure

6). High tractive force

7). Light weight

8). Easy to change

Crawler Chasis,Crawling Chase,Undercarriage For Drilling Machine,Rubber Track For Drilling Rig

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.nbxitecdrilling.com