Low Boiling Point Solvent Recovery Machine, high-end special equipment made for organic solvent recovery, automatic cycle operation, built in pneumatic Automatic Feeding Device and vaccum pressure device, air-cooled condensing system, stationary and safe structure, is manufactured according to Chinese explosion-proof standards (CNEX) and European standards (ATEX). By distillation and cooling, clean organic solvents are recycled for use. Low Boiling Point Solvent Recovery Machine Low Boiling Point Solvent Recovery Machine,Dichloromethane Recycling Machine,Trichloroethylene Recycling Machine SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , http://www.calstarkb.com
1. Using inverter technology, IGBT dual module to save energy.
2. Reactors and transformers are all copper wire wound.
3. The actual input current ensures compliance with the described current value.
4. Small size, light weight, high reliability, good welding effect.
5. All products are available for OEM.
6.Guaranty: One year for the whole machine and PC board, and we will offer you spares valued 4% of the total amount for you to do maintenance.
Features:
1.Adopt the soft switch technology, high efficiency, low power consumption
2.Automatic protection from overcurrent, overheat, over/under voltage
3.Support DC TIG welding, pulse TIG welding and MMA welding, can weld such metals as stainless steel, alloy steel, copper, silver, titanium, etc.
4. In TIG welding, can select DC or pulse welding according to the requirements, can adjust the peak/bottom current, pulse duty circle and frequency according to the size of welding seam
5. In TIG welding, HF automatically strikes arc, and extinguish automatically after the arc is successfully stroke, high efficiency
6. With the long/short seam switch and gas/water cooling switch, can make selection according to the actual need
7.In MMA welding, suitable for the electrode with a diameter of below 5.8mm
8.Can realize TIG grounding and MMA covering once a time, high efficiency, especially suitable for the welding of thin rare-metal board
9.Wide range of supply voltage, as wide as ±20%
Technical Parameters:
Contents
WSM7-400
Power source
3-phase 380V/415V Â 50Hz
Rated input capacity
17.3 KVA
Rated input current
26.3 A
Rated TIG welding current
400A
Welding current
400A 60%DE
Â
315A 100%DE
Adjustment range of current (A)
20-400
Efficiency
>85%
No-load voltage
TIG
40-50V
Â
MMA
70-80V
Current up/down-slope time
0-10 S
Maintaining time
0-10 S
Peak//bottom current (A)
20-400
Pulse frequency (Hz)
0.25-25
Pulse duty circle (%)
1-99
Dimensions (mm)
590×306×500
Weight (Kg)
55
Sichuan Morrow Welding Development Co., Ltd. ( MORROW WELDING) is a high-tech enterprise specialized in research, development, production and sales of IGBT series inverter welding products.
 We established Morrow Inverter Power Research Institute to specially engage in research, development, and regeneration of inverter welding machine.
We can develop and produce specialized products according to different requirements of different customers.
All of our products are produced in line with ISO9001:2000 quality system certificate and have "CCC" certificate.
With the business philosophy of "Quality First, Performance First, and Service First", we are dedicated to offering ideal welding equipment for domestic and overseas customers.
Â
Product Description:
1. Using inverter technology, IGBT dual module to save energy.
2. Reactors and transformers are all copper wire wound.
3. The actual input current ensures compliance with the described current value.
4. Small size, light weight, high reliability, good welding effect.
5. All products are available for OEM.
6.Guaranty: One year for the whole machine and PC board, and we will offer you spares valued 4% of the total amount for you to do maintenance.
Features:
1.Adopt the soft switch technology, high efficiency, low power consumption
2.Automatic protection from overcurrent, overheat, over/under voltage
3.Support DC TIG welding, pulse TIG welding and MMA welding, can weld such metals as stainless steel, alloy steel, copper, silver, titanium, etc.
4. In TIG welding, can select DC or pulse welding according to the requirements, can adjust the peak/bottom current, pulse duty circle and frequency according to the size of welding seam
5. In TIG welding, HF automatically strikes arc, and extinguish automatically after the arc is successfully stroke, high efficiency
6. With the long/short seam switch and gas/water cooling switch, can make selection according to the actual need
7.In MMA welding, suitable for the electrode with a diameter of below 5.8mm
8.Can realize TIG grounding and MMA covering once a time, high efficiency, especially suitable for the welding of thin rare-metal board
9.Wide range of supply voltage, as wide as ±20%
Technical Parameters:
Contents
WSM7-400
Power source
3-phase 380V/415V Â 50Hz
Rated input capacity
17.3 KVA
Rated input current
26.3 A
Rated TIG welding current
400A
Welding current
400A 60%DE
Â
315A 100%DE
Adjustment range of current (A)
20-400
Efficiency
>85%
No-load voltage
TIG
40-50V
Â
MMA
70-80V
Current up/down-slope time
0-10 S
Maintaining time
0-10 S
Peak//bottom current (A)
20-400
Pulse frequency (Hz)
0.25-25
Pulse duty circle (%)
1-99
Dimensions (mm)
590×306×500
Weight (Kg)
55
Sichuan Morrow Welding Development Co., Ltd. ( MORROW WELDING) is a high-tech enterprise specialized in research, development, production and sales of IGBT series inverter welding products.
 We established Morrow Inverter Power Research Institute to specially engage in research, development, and regeneration of inverter welding machine.
We can develop and produce specialized products according to different requirements of different customers.
All of our products are produced in line with ISO9001:2000 quality system certificate and have "CCC" certificate.
With the business philosophy of "Quality First, Performance First, and Service First", we are dedicated to offering ideal welding equipment for domestic and overseas customers.
Â
Inverter IGBT Hf Pulse TIG Welding Machine with MMA Function (TIG-400A)
Model NO.: WSM7-400
Trademark: MORROW
Origin: China
HS Code: 8515390000
Model NO.: WSM7-400
Trademark: MORROW
Origin: China
HS Code: 8515390000
Product Description: