Tube Forming Machine with Ce Certificate (2CPV)

1. Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
2. Weight: 160 kg
3. Power supply: 220V±10%, 50Hz/60Hz, single phase
4. Power: 1 KW
5. Air pressure: 0.4-0.8MPa;
6. Clamping mode: pneumatic;
7. Clamping force: >=5KN;
8. Rotation axis: asynchronous motor, 0.75kw;
9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
10. Rotation axis deflection: ≤0.01 mm;

1. Tube OD of chamfer/squaring/deburring: Φ6-50mm;
2. Tube WT of chamfer/squaring/deburring: ≤10mm;
3. Tube OD of flaring: Φ 3-50 mm;
4. Tube WT of flaring: Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
5. Flaring method: eccentric inner diameter rotary swage;
6. Tube OD of beading: Φ6-45 mm;
7. Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
8. Beading method: inner diameter rotary swage;
9. Tube min clamp: 10mm (flare tube is based on material and wall thickness);
10. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;

1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
2. After quick change dies, it can complete the tube flaring processing and beading.
3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
4. Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
5. Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
7. Tube feeding length positioning function, ensure tube process length and repeat precision.
8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.

1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
2. Variable frequency control of motor, to achieve the spindle high precision control.
3. Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
5. The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.

1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
3. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
   
4. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
    
    

1. Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
2. Weight: 160 kg
3. Power supply: 220V±10%, 50Hz/60Hz, single phase
4. Power: 1 KW
5. Air pressure: 0.4-0.8MPa;
6. Clamping mode: pneumatic;
7. Clamping force: >=5KN;
8. Rotation axis: asynchronous motor, 0.75kw;
9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
10. Rotation axis deflection: ≤0.01 mm;

1. Tube OD of chamfer/squaring/deburring: Φ6-50mm;
2. Tube WT of chamfer/squaring/deburring: ≤10mm;
3. Tube OD of flaring: Φ 3-50 mm;
4. Tube WT of flaring: Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
5. Flaring method: eccentric inner diameter rotary swage;
6. Tube OD of beading: Φ6-45 mm;
7. Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
8. Beading method: inner diameter rotary swage;
9. Tube min clamp: 10mm (flare tube is based on material and wall thickness);
10. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;

1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
2. After quick change dies, it can complete the tube flaring processing and beading.
3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
4. Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
5. Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
7. Tube feeding length positioning function, ensure tube process length and repeat precision.
8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.

1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
2. Variable frequency control of motor, to achieve the spindle high precision control.
3. Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
5. The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.

1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
3. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
   
4. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
    
    

Cleaning brush Description:

Twisted-in-wire brushes are commonly referred to by our customers as"twisted brushes", [Tube Brushes", [bottle brushes", [pipe brushes", [spiral Brushes", [power or internal cleaning brushes". They are suitable for both manual and powered tools like drillers, drill presses and CNC machining centers.

sted-in-wire brushes are commonly referred to by our customers as"twisted brushes", [tube brushes", [bottle brushes", [pipe brushes", [spiral Brushes", [power or internal cleaning brushes". They are suitable for both manual and powered tools like drillers, drill presses and CNC machining centers.

Hand Brushes And Parts

Parts Cleaning Brush, Parts Cleaning Brushes

Beilun Futuo Mechanical Tools Co.,Ltd , http://www.futuobrushes.com