The super fine pulverizer can mill material to super fineness powder. It's widely used in pharmaceutical, chemical and foodstuff industry. The smallest size of output powder can reach 300 mesh.
The machine can continue work, the largest production ability can be 1000kg/h.
Features/Equipment characteristics:
1). Appearance design is reasonable and safe. The structure of this machine is simply, so it's convenient to clean and maintenance.
2). The blade is sharp, sturdy, strong and durable, and the material is harmless to people.
3). The plate of the whole machine is heavier than ordinary machines and has a longer service life.
4). The output particle size can be changed according to customer`s request.
5 ).The machine can match dust collect system, so the air in workshop will clean.
Super Fine Powder Mill,Super Fine Powder Grinder,Grinder For Fine Powder,Grinding Machine For Powder Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jyjiruimachine.com
The Tungsten Carbide Rings  is a kind of tool material which consists of tungsten carbide and cobalt with high hardness and wear resistance.This kind of rings are used as work rings in stands of pre-finishing rolling mills, stands of finishing rolling mills and stands of reducing sizing mills.
Announcements For Use
1.You should select the appropriate rings to meet the rolling mills.
2.For installing the rings, you must be exactly according to the instructions. Any incorrect operation, for example, the fitting between ring and arbor or the space rings is too tight or too loose, may cause the roll failing to work. It is also very important to check if the rings confirm to the  technical requirements and clean the rings, arbor and spacer rings prior to rolling. It is strictly prohibited to hit the rings with hammer or other hard objects while assembling.
3.Cooling is intended to reduce the influence on roll rings thermal corrosion, fatigue and stress during milling. It can prevent optimizing the performances of roll rings. The reference data for cooling are as follows: The temperature of cooling water is below 25ºC, pressure of cooling water is 5-6 bar  with a water volume of 24-30m/hr/stand. The water is jetted in a radial direction and the angle between the water jet and the rotating direction of roll rings is 15-30 degrees. The width of the water column is 2 times that of the groove and the water should be jetted directly into the grooves and the water should not be scattering or misty.
Water Quality Requirement
For YGH series PH 7.2 medium or weak alkali water
For YGR series PH 7.2 or PH 7.2weak acid water
The content of solid particles in the water<15 milligram/litre
Even in the perfect cooling condition, the fatigue crack will appear. To prevent it from growing, we need to re-machine the pass timely when the fatigue crack reaches 0.2mm deep. Otherwise, the growing crack may cause the roll breaking anytime.
The Regular Pass Life Is Recommended As Follows
Stands of pre-finishing rolling mill: 3500-4000 tons
1-2 Stands of finishing rolling mill: 1800-2500 tons
3-4 Stands of finishing rolling mill: 1800-2500 tons
5-6 Stands of finishing rolling mill: 1500-2000 tons
7-8Â Stands of finishing rolling mill:Â 1500-2000 tons
9-10Â Stands of finishing rolling mill:Â 600-1200 tons
Stands of reducing sizing mill: 600-1200 tons
Repair Of GrooveÂ
In order to remove the fatigue crack completely, we need to re-dress the pass deep enough. Actually, it is quite difficult and inconvenient to check if the fatigue crack is still there or not. Here are some suggestions of re-dressing for your reference:
Roll rings for 9-10 finishing stands : 0.4-0.6 mm
Roll rings for 1-8 finishing stands : 0.7-1.2 mm
Roll rings for pre-fiishing stands :1.2-2.0 mm
Table Of Grades Recommended For Different Stands
Grades
YGH
YGR
Mill Classes
A
B
C
A
B
C
Stands Of Pre-finishing Rolling Mills
1
YGH55
YGH55
YGH55
YGR60
YGR60
YGR60
2
YGH55
YGH55
YGH55
YGR60
YGR60
YGR60
3
YGH50
YGH55
YGH55
YGR55
YGR55
YGR60
4
YGH50
YGH55
YGH55
YGR50
YGR55
YGR55
Stands Of FinishingÂ
Rolling Mills1
YGH45
YGH50
YGH50
YGR40
YGR45
YGR45
2
YGH45
YGH50
YGH50
YGR40
YGR45
YGR45
3
YGH40
YGH45
YGH50
YGR40
YGR45
YGR45
4
YGH40
YGH45
YGH50
YGR40
YGR45
YGR45
5
YGH30
YGH40
YGH45
YGR30
YGR40
YGR45
6
YGH30
YGH40
YGH45
YGR30
YGR40
YGR45
7
YGH30
YGH40
YGH45
YGR30
YGR40
YGR40
8
YGH30
YGH40
YGH45
YGR30
YGR40
YGR40
9
YGH20
(YGH25)YGH25
(YGH30)YGH40
YGR20
(YGR25)YGR25
(YGR30)YGR40
10
YGH20
(YGH25)YGH25
(YGH30)YGH40
YGR20
(YGR25)YGR25
(YGR30)YGR40
Stands Of ReducingÂ
Rolling Mills1
YGH40
YGH45
(YGH40)YGH45
YGR40
YGR45
(YGR40)YGR45
2
YGH40
YGH45
(YGH40)YGH45
YGR40
YGR45
(YGR40)YGR45
3
YGH20
(YGH25)YGH30
(YGH25)YGH40
(YGH30)YGR20
(YGR25)YGR30
(YGR25)YGR40
(YGR30)
4
YGH20
(YGH25)YGH20
(YGH25)YGH40
(YGH30)YGR20
(YGR25)YGR30
(YGR25)YGR40
(YGR30)
About Us
TANGSHAN WEILANG is a full intergrative enter prise who is dedicated to design, products, sales, and service in metallurgical products. Our products contain various customized mill rolls and roll rings for different kinds of bar&ware mills, section mills, plate&strip mills, tube mills etc.,which has been supplied to 20 countries and regions including Southeast Asia, Europe, North America, and Middle East. If you are interested in our products,pls send the detail drawings and technical requirements to us, we will send you prompt reply professional and best quotation.
Â
The Tungsten Carbide Rings  is a kind of tool material which consists of tungsten carbide and cobalt with high hardness and wear resistance.This kind of rings are used as work rings in stands of pre-finishing rolling mills, stands of finishing rolling mills and stands of reducing sizing mills.
Announcements For Use
1.You should select the appropriate rings to meet the rolling mills.
2.For installing the rings, you must be exactly according to the instructions. Any incorrect operation, for example, the fitting between ring and arbor or the space rings is too tight or too loose, may cause the roll failing to work. It is also very important to check if the rings confirm to the  technical requirements and clean the rings, arbor and spacer rings prior to rolling. It is strictly prohibited to hit the rings with hammer or other hard objects while assembling.
3.Cooling is intended to reduce the influence on roll rings thermal corrosion, fatigue and stress during milling. It can prevent optimizing the performances of roll rings. The reference data for cooling are as follows: The temperature of cooling water is below 25ºC, pressure of cooling water is 5-6 bar  with a water volume of 24-30m/hr/stand. The water is jetted in a radial direction and the angle between the water jet and the rotating direction of roll rings is 15-30 degrees. The width of the water column is 2 times that of the groove and the water should be jetted directly into the grooves and the water should not be scattering or misty.
Water Quality Requirement
For YGH series PH 7.2 medium or weak alkali water
For YGR series PH 7.2 or PH 7.2weak acid water
The content of solid particles in the water<15 milligram/litre
Even in the perfect cooling condition, the fatigue crack will appear. To prevent it from growing, we need to re-machine the pass timely when the fatigue crack reaches 0.2mm deep. Otherwise, the growing crack may cause the roll breaking anytime.
The Regular Pass Life Is Recommended As Follows
Stands of pre-finishing rolling mill: 3500-4000 tons
1-2 Stands of finishing rolling mill: 1800-2500 tons
3-4 Stands of finishing rolling mill: 1800-2500 tons
5-6 Stands of finishing rolling mill: 1500-2000 tons
7-8Â Stands of finishing rolling mill:Â 1500-2000 tons
9-10Â Stands of finishing rolling mill:Â 600-1200 tons
Stands of reducing sizing mill: 600-1200 tons
Repair Of GrooveÂ
In order to remove the fatigue crack completely, we need to re-dress the pass deep enough. Actually, it is quite difficult and inconvenient to check if the fatigue crack is still there or not. Here are some suggestions of re-dressing for your reference:
Roll rings for 9-10 finishing stands : 0.4-0.6 mm
Roll rings for 1-8 finishing stands : 0.7-1.2 mm
Roll rings for pre-fiishing stands :1.2-2.0 mm
Table Of Grades Recommended For Different Stands
Grades
YGH
YGR
Mill Classes
A
B
C
A
B
C
Stands Of Pre-finishing Rolling Mills
1
YGH55
YGH55
YGH55
YGR60
YGR60
YGR60
2
YGH55
YGH55
YGH55
YGR60
YGR60
YGR60
3
YGH50
YGH55
YGH55
YGR55
YGR55
YGR60
4
YGH50
YGH55
YGH55
YGR50
YGR55
YGR55
Stands Of FinishingÂ
Rolling Mills1
YGH45
YGH50
YGH50
YGR40
YGR45
YGR45
2
YGH45
YGH50
YGH50
YGR40
YGR45
YGR45
3
YGH40
YGH45
YGH50
YGR40
YGR45
YGR45
4
YGH40
YGH45
YGH50
YGR40
YGR45
YGR45
5
YGH30
YGH40
YGH45
YGR30
YGR40
YGR45
6
YGH30
YGH40
YGH45
YGR30
YGR40
YGR45
7
YGH30
YGH40
YGH45
YGR30
YGR40
YGR40
8
YGH30
YGH40
YGH45
YGR30
YGR40
YGR40
9
YGH20
(YGH25)YGH25
(YGH30)YGH40
YGR20
(YGR25)YGR25
(YGR30)YGR40
10
YGH20
(YGH25)YGH25
(YGH30)YGH40
YGR20
(YGR25)YGR25
(YGR30)YGR40
Stands Of ReducingÂ
Rolling Mills1
YGH40
YGH45
(YGH40)YGH45
YGR40
YGR45
(YGR40)YGR45
2
YGH40
YGH45
(YGH40)YGH45
YGR40
YGR45
(YGR40)YGR45
3
YGH20
(YGH25)YGH30
(YGH25)YGH40
(YGH30)YGR20
(YGR25)YGR30
(YGR25)YGR40
(YGR30)
4
YGH20
(YGH25)YGH20
(YGH25)YGH40
(YGH30)YGR20
(YGR25)YGR30
(YGR25)YGR40
(YGR30)
About Us
TANGSHAN WEILANG is a full intergrative enter prise who is dedicated to design, products, sales, and service in metallurgical products. Our products contain various customized mill rolls and roll rings for different kinds of bar&ware mills, section mills, plate&strip mills, tube mills etc.,which has been supplied to 20 countries and regions including Southeast Asia, Europe, North America, and Middle East. If you are interested in our products,pls send the detail drawings and technical requirements to us, we will send you prompt reply professional and best quotation.
Â
This machine have dust collect system, so the air in workshop will clean.
This machine is popularly used in foodstuff, chemical and pharmacy industry.
Wc Tungsten Carbide Ring/ Mill Roll Ring
Model NO.: As per drawing
Coating: as Per Requirement
Machining Tolerance: as Per Drawings
Standard: GB
Certification: CE, ISO 9001:2000, ISO 9001:2008
Use: Used as Work Roll Ring in Finishing Stands.
Our Advantage: Rich Experience, Best Service, Professional Team.
Our Customers: Russia,Turkey, Bangladesh, Columbia,Vietnam
Inspection: Ut, Metallographic Examination, Hardness Test etc.
Plant: We Have Our Own Factory
Exhibition: We Always Attend Some Exhibition in Abroad.
Specifications: High Dimension Accuracy, Wear Resistance
After Sales Service: Engineer Available to Service Machinery Overseas
Application: Hot Strip Mills,Bar Mills, Universal Section Mills
OEM: We Can Also Accept The Trail Order.
Trademark: WEILANG
Transport Package: Metal Pallet or Wooden Case
Specification: as per drawing
Origin: China
HS Code: 84553000
Model NO.: As per drawing
Coating: as Per Requirement
Machining Tolerance: as Per Drawings
Standard: GB
Certification: CE, ISO 9001:2000, ISO 9001:2008
Use: Used as Work Roll Ring in Finishing Stands.
Our Advantage: Rich Experience, Best Service, Professional Team.
Our Customers: Russia,Turkey, Bangladesh, Columbia,Vietnam
Inspection: Ut, Metallographic Examination, Hardness Test etc.
Plant: We Have Our Own Factory
Exhibition: We Always Attend Some Exhibition in Abroad.
Specifications: High Dimension Accuracy, Wear Resistance
After Sales Service: Engineer Available to Service Machinery Overseas
Application: Hot Strip Mills,Bar Mills, Universal Section Mills
OEM: We Can Also Accept The Trail Order.
Trademark: WEILANG
Transport Package: Metal Pallet or Wooden Case
Specification: as per drawing
Origin: China
HS Code: 84553000