Diocty Adipate (DOA) is an excellent cold-resistant plasticizer,it has plasticized high efficiency,low volatility,it is applicable for Polyvinyl Chloride,vinyi chloride copolymer,polystyrene ,and synthetic rubber and other resins it can let product bearing excellent softness of cold-resistant,light-resistant,light-fastness,it is Particularly applicable together with DOP,DBP to production cold-resistant farm film,,frozen food packing film,.electrical wire & cable's clad ,leatheroid,plank,outer door water hose etc.When using as paste it has low initial viscosity,good viscosity stability, many countries allow this plasticizer to be used as food packing material such as USA, France, Italy ,Japan,Holland etc. Dioctyl Adipate,Dioctyl Adipate Doa,Plasticizer And Stabilizer,Stabilizer Dioctyl Adipate Dongying Kexing International Trade Co., Ltd , https://www.kxiechem.com
1. Collectors: Check at least once every quarter. Check the fasteners for looseness, displacement and wear of plastic parts and moving parts, check the spring tension (the contact pressure between the collector brushes and the guide rails should maintain a certain pressure (see the table below). Find problems and deal with them in time.
2. Connector: Check it at least once a year. Focus on checking whether the fastening bolts, welds, and supports are loose, rusted, or displaced. If any problems are found, handle them in time.
3, brush: should be checked every 1-3 months according to the use of mobile electrical equipment. Focus on checking the wear of the collector brush. If the wear is ≥ 5mm, it must be replaced. If the brush is found to be loose or if the wear deflection occurs during the inspection, the cause should be ascertained and dealt with promptly.
4. Daily inspection: Check whether the straightness of the track has obvious deviation (more than 20mm), misalignment, whether the insulation protection piece is detached, broken or damaged, and whether the stainless steel “v†groove is tilted; if there is any foreign matter on the track And conductive dust and so on. If necessary, check whether the insulation resistance meets the requirements (interphase insulation resistance should be ≥ 5MΩ).
In particular, it is necessary to strengthen day-to-day inspections and maintenance for vehicles with large deviations in track alignment, track distance, and inclination, frequent use, excessive dust in workshops, high temperatures, and water, acid, alkali, fog, and outdoor use environments.
Talking about the daily maintenance and maintenance of trolley line
In order to ensure the normal operation of the trolley line and prolong its service life, after the trolley line is put into operation, it should be regularly inspected. Nowadays, we have introduced to you the daily maintenance and maintenance of the trolley line by the Shanghai Security Line Contact Line Manufacturer.