High Speed Injection Molding Machine High Speed Injection Molding Machine,350Ton High Speed Injection Molding Machine,Plastic Chair Blowing Machine,Plastic Pvc Water Pipe Production Machine Ningbo Jietan Machinery Equipment Trading Co., Ltd. , https://www.jietanmachine.com
The machine adopts a 37kW AC motor, which drives the flywheel to rotate through the pneumatic clutch, and transmits it to the punching arm through the reducer. At the same time, the reducer synchronously drives the mold part to perform indexing rotation to realize stamping and die-out movement. The discharge specifications are 型90, 芰115, 芰135 and other types of briquettes. After the mold is rotated 60 degrees, the auxiliary punch is used to remove the material, and the belt is transported and manually packed. The driving device of the machine is matched with the pneumatic clutch and the safety clutch, which greatly improves the service life of the device, and is simple in operation and stable in operation.
Laiwu Machinery Factory successfully produced CX200 new stamping machine
A new type of coal mining equipment--CX200 stamping forming machine was successfully trial-produced at Shandong Laiwu Machinery Factory.
With optimized hydraulic system,the injection speed increased significantly.
Matching special dedicated fast screw,showing a higher plas-ticizing capacity.
Improved double cylinder balance injection system.
The high rigidity of the clamping structure to meet the requirements of high pressure,which will
help extend the life of the mould,sub-stantially increase the accuracy of products.