Pneumatic G-Thread Components with Nickel Plated and O-Ring Pl12-G01

Model NO.: PL12-G01
Material: Copper
Trademark: RTQD
Transport Package: Small Plastic Bag, Carton
Origin: Wenzhou, Zhejiang
HS Code: 3917400000
We offer a wide range of products to satisfy your requirements. Such as plastic fitting,high-pressure  fitting,mini fitting etc., which are widely used in automotive industry, auto-machiner environmental protection, medical equipments, construction, and packaging industries and so on.

The tube fitting comes in a wide variety of tube and thread sizes. Even after installation the direction of the tubing can be changed freely.
Pneumatic G-Thread Components with Nickel Plated and O-Ring Pl12-G01
Sizes Available:
Tubing - Inch, Metric;
Thread - NPT, BSPT (R), Metric, Unified (UNF), BSPP (G)

NPT --- National (American) Pipe Tapered Thread
BSPT (R) ---British Standard Pipe Tapered Thread
BSPP (G) --- British Standard Pipe Parallel Thread

1: Quick installation.
2: Nickel plated feature ensures anti-corrosion and anti-contamination properties of an extended product life.
3: Pre-applied sealant on all external threads eliminates the additional sealing requirement.
4: A wide variety of models available to meet customers' changing needs in pneumatic piping.
5: Simple and flexible. The direction of the tube can be changed freely even after installation.
6: Internal and external flat to flat hexagonal configurations for both metric and inch
Specifications allow a proper tightening or directional orientation upon installation by using
L key or allen wrench for the applicable model types.
7: The color of sleeve button can be changed as your requests.

Operating Pressure
0 - 150 PSI       0 - 990 kpa
Operating Temperature 0 - 60 °C         32 to 140F
Application Air,water
Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
Types Straight, Elbow, Tee, X, Y, etc.
Capacity Over 3000000pcs/month
Marketing Area
 
Europe, America, Asia, Mideast. 90% of our products are exported

For SANY Cylinder Seal Kit

Installation steps for SANY hydraulic cylinder seals

Cylinder Seal Kit2
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.


For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany

Safe Seal Technology Co., Ltd. , https://www.jsspreals.com