NF P92-505 Thermal Radiation Dripping Test Apparatus for Melting Materials

Model NO.: NF505
Model NO.: NF505

NF P92-505 Thermal Radiation Dripping Test Apparatus For Melting Materials

Description:

This equipment is suitable for hot melt material effect in the primary heat source to evaluate the performance of dripping and burning performance testing. Flexible and thin materials can be tested. 
Meets international standards NF P92-505, EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. According to NF P 92-505 request, the test is additional test for M-class building materials.

Standards:
NF P92-505
EU 95/28/EC
ECE R118 Annex 7

Installation requirements:
Electrical : 110V AC 60Hz / 230V AC 50Hz
Ambient Temperature: Operating 10°C to 35°C
 

Features:

1, All fixtures are made of stainless steel material, appearance nice and corrosion resistance;
2, Radiation bracket can be rotated, the rotation angle is greater than 90 degrees and easy to install the sample;
3, Sample installation height can be adjusted;
4, Electric power radiators
5, The radiant heat radiator can be adjusted linear through the power control automatic adjustment;
6, The radiation shield is a quartz glass and the opening diameter is 100mm ± 5mm;
7, The heat radiation reach to to 3W / cm³ the position 30mm from the radiation shield plane.
8, Sample holder ring is made of stainless steel and the inner diameter is 118mm;
9, Take off the plate inner diameter is 118mm, depth 12mm, internal plug of cotton

NF P92-505 Thermal Radiation Dripping Test Apparatus for Melting Materials
 


NF P92-505 Thermal Radiation Dripping Test Apparatus For Melting Materials

Description:

This equipment is suitable for hot melt material effect in the primary heat source to evaluate the performance of dripping and burning performance testing. Flexible and thin materials can be tested. 
Meets international standards NF P92-505, EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. According to NF P 92-505 request, the test is additional test for M-class building materials.

Standards:
NF P92-505
EU 95/28/EC
ECE R118 Annex 7

Installation requirements:
Electrical : 110V AC 60Hz / 230V AC 50Hz
Ambient Temperature: Operating 10°C to 35°C
 

Features:

1, All fixtures are made of stainless steel material, appearance nice and corrosion resistance;
2, Radiation bracket can be rotated, the rotation angle is greater than 90 degrees and easy to install the sample;
3, Sample installation height can be adjusted;
4, Electric power radiators
5, The radiant heat radiator can be adjusted linear through the power control automatic adjustment;
6, The radiation shield is a quartz glass and the opening diameter is 100mm ± 5mm;
7, The heat radiation reach to to 3W / cm³ the position 30mm from the radiation shield plane.
8, Sample holder ring is made of stainless steel and the inner diameter is 118mm;
9, Take off the plate inner diameter is 118mm, depth 12mm, internal plug of cotton

NF P92-505 Thermal Radiation Dripping Test Apparatus for Melting Materials
 

Waste Gas Treatment Equipment

Exhaust gas treatment device.

Waste gas treatment equipment mainly refers to a kind of environmental protection equipment that protects the environment and purifies the air through the use of different process technologies to recover or remove and reduce harmful components in the exhaust gas, so that our environment is not polluted.

There are several categories:
Absorption equipment, adsorption equipment, purification equipment, treatment equipment.

The processing principle is:
Dilution diffusion method, water absorption method, aeration deodorization method, catalytic oxidation process, low temperature plasma.


Waste Gas Treatment Equipment,Surface Treatment Equipment,Waste Gas Treatment Barrel,Waste Gas Equipment

Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.xingyimachinery.com