Plastic Actuator Normal Open Angle Seat Valves

Model NO.: VPC10P-40
Size: 0.75
Usage: Sanitary Ware, Heating Pipeline
Situation: Industrial
Service Life: >3 Years
Trademark: VPC Pneumatic
Transport Package: Inner Box, Outer Carton...Pallet
Specification: CE, ROHS, SGS. ISO9001: 2000
Origin: China
HS Code: 8481804090
Model NO.: VPC10P-40
Size: 0.75
Usage: Sanitary Ware, Heating Pipeline
Situation: Industrial
Service Life: >3 Years
Trademark: VPC Pneumatic
Transport Package: Inner Box, Outer Carton...Pallet
Specification: CE, ROHS, SGS. ISO9001: 2000
Origin: China
HS Code: 8481804090

Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves


Angle seat valves's Summary:

  • Compact in size and lightweight.
  • Long service life, economical investment.
  • Large flux, small flux resistance, no water hammer.
  • Stem automatic correction, self-lubrication, maintenance free.

Angle seat valves's Specifications:

Control type Normal closed,normal open,double acting
Cylinder material stainless steel, polyamide PA
Pneumatic accessories Limit switch, locator, solenoid valve, filter relief-pressure valve, manual operating device
Medium temperature PTFE:-30~180ºC   F46:-30~+220ºC
Environment temperature -30~80ºC
Nominal pressure 1.0~1.6MPa
Nominal diameter DN10-50-80mm
Connection type Thread,Flanged, Clamp, Welded
Body construction One-piece, Y-type
Body material 304,316, 316L
Spool pressure 304,316, 316L
Seal material PTFE,F46
Applicable medium Steam, water, air, oil etc.

Angle seat valves's installation and disassembly :

1. Based on concrete conditions select the valve installations direction

2. Installation charge of road should be cleaned to ensure no impurites or medium welding slag, so as not to damage the valves, causing leakage.

3. Install welded vavle, be sure to detach the valve actuator

4. Select the appropriate adjustment range of the regulator

5. Ensure that the air pressure range sufficient capacity

6. Check to ensure seal integrity of the connection

7. Valve repair or replacement, the demolition of the body and the connecton in the room temperature, the valve under the state open to avoid damage to the thread

8. Installation and connection in the body the threads coated with a small amount of thread grease, and tighten
Design Character
--Can see the position indication
--Easy to install
--Actuator adopt low abrasion piston structure,big capacity and low wastage
--There is lubricative for inner parts,no need maintaince
--The actuator material have stainless steel, Aluminum and Plastic
--Long life for the piston pole,PTFE seal,avoid the reif come in
--No water hammer effect,when the liquid flowed from valve underside,the water hammer will be absorbed


 

Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves
Plastic Actuator Normal Open Angle Seat Valves


Angle seat valves's Summary:

  • Compact in size and lightweight.
  • Long service life, economical investment.
  • Large flux, small flux resistance, no water hammer.
  • Stem automatic correction, self-lubrication, maintenance free.

Angle seat valves's Specifications:

Control type Normal closed,normal open,double acting
Cylinder material stainless steel, polyamide PA
Pneumatic accessories Limit switch, locator, solenoid valve, filter relief-pressure valve, manual operating device
Medium temperature PTFE:-30~180ºC   F46:-30~+220ºC
Environment temperature -30~80ºC
Nominal pressure 1.0~1.6MPa
Nominal diameter DN10-50-80mm
Connection type Thread,Flanged, Clamp, Welded
Body construction One-piece, Y-type
Body material 304,316, 316L
Spool pressure 304,316, 316L
Seal material PTFE,F46
Applicable medium Steam, water, air, oil etc.

Angle seat valves's installation and disassembly :

1. Based on concrete conditions select the valve installations direction

2. Installation charge of road should be cleaned to ensure no impurites or medium welding slag, so as not to damage the valves, causing leakage.

3. Install welded vavle, be sure to detach the valve actuator

4. Select the appropriate adjustment range of the regulator

5. Ensure that the air pressure range sufficient capacity

6. Check to ensure seal integrity of the connection

7. Valve repair or replacement, the demolition of the body and the connecton in the room temperature, the valve under the state open to avoid damage to the thread

8. Installation and connection in the body the threads coated with a small amount of thread grease, and tighten
Design Character
--Can see the position indication
--Easy to install
--Actuator adopt low abrasion piston structure,big capacity and low wastage
--There is lubricative for inner parts,no need maintaince
--The actuator material have stainless steel, Aluminum and Plastic
--Long life for the piston pole,PTFE seal,avoid the reif come in
--No water hammer effect,when the liquid flowed from valve underside,the water hammer will be absorbed


 

Stainless Steel Pipe

Stainless Steel Pipe,Stainless Steel Threaded Pipe,Stainless Square Tube,304 Steel Pipe

SUZHOU METAL (BIM) TECHNOLOGY CO., LTD , https://www.szbimmetal.com