Truck lifting truck

上随 (gets up with the heavy and transport vehicle)

Model Overview: With the car crane, full-load crane truck, is a hydraulic lift and telescopic system to achieve the lifting, rotation, lifting of the equipment, usually assembled on the truck. Truck Crane: It is generally composed of a truck chassis, a cargo box, a power take-off device, and a crane. The chassis of the truck can be selected from Dongfeng, Liberation, Auman, Steyr and other tonnages. The classification of truck cranes: The cranes can be divided into XCMG, Yutong Heavy Industry, Feitao, Stone Coal, etc. According to the manufacturer, they are divided into the straight arm type and the folded arm type according to the crane type, divided into 2 tons, 3.2 tons, 5 according to the tonnage. Tons, 6.3 tons, 8 tons, 10 tons, 12 tons, 16 tons

On-board crane truck (mounted crane) operation guide: 1. Lifting equipment drivers must undergo professional safety training, and after the relevant departments assessment and approval, issued a combination of documents, will be allowed to operate alone. Unauthorized personnel are strictly forbidden to use lifting equipment. 2. Before the work, it is necessary to check whether each operation device is normal, whether the wire rope meets the safety requirements, and whether the brake, hydraulic device, and safety device are complete and sensitive and reliable. It is forbidden to run the machine sick. 3. The boom elevation angle must not be less than 30° and cranes should avoid lifting booms under load conditions. It is forbidden to change the joystick before the lift arm is lifted up and down steadily. 4. The driver and the lifter must closely cooperate and obey the signal command of the commander. Before the operation, the horn must be honking. If it is found that the command is unclear or wrong, the driver has the right to refuse to perform. During the work, the driver must immediately stop the emergency stop signal sent by any person and continue to work until the unsafe factors are eliminated. 5. Must abide by all traffic management rules and relevant rules and regulations, drunk driving is strictly prohibited. When driving, smoking, eating, and chat are not allowed. 6. When lifting a heavier item, the weight should be lifted about 10 centimeters away from the ground. Check the crane's stability and brakes are flexible and effective, and continue to work under normal conditions.

On-board crane truck (with crane) Operator Responsibilities 1. Be aware of your vehicle, you must know his function and limitations, and some of its special operating characteristics. 2, should be fully familiar with the contents of the operation manual of the lifting crane truck. 3, should be fully familiar with the truck crane truck lifting map. Must understand the meaning of all signs and warnings; be able to calculate or determine the actual lifting capacity of the on-board crane truck. 4, according to the requirements of the manufacturer, regular inspection and maintenance of truck lifting transport. 5, do a good job with the car lifting transport log, in the log records: all inspections, maintenance and maintenance of the lorry on the transport of a detailed record. 6, find the load, install the lock, and find out the specific location of the load. Although the operator is not responsible for determining the weight of the load, if he does not verify the weight with the supervisor, he is responsible for the lifting of the vehicle and all consequences. 7. Consider all factors that may affect the hoisting capacity of the truck, and adjust the hoisting weight accordingly. 8, know how to load the basic procedures for rigging, and ensure the implementation of specific operations. 9. Keep good communication with the signallers. 10, smooth and safe operation with the car lifting and transport. 11. When the truck is being lifted and transported and no one is operating, the work should be stopped and operated correctly.

Onboard truck crane components: It is composed of three types of chassis, cargo containers and cranes.

Special function description of truck-mounted lift truck: When the working range is 7.180m, 950KG, the maximum working radius (m): 7.180. When the working range is 5.630m: 1250KG; The maximum lifting height (m): 9.4 When the working range is 4.030: 1900KG; Crane weight: 1250KG Working width 2.000m, 4000KG, Rotation angle (degrees): Positive and negative 360 ​​degrees Maximum lifting mass (KG) 4000KG; Number of booms: Two-section telescopic boom; Maximum lifting moment (T.M) :8