Longlived 201 Stainless Steel Cut Wire Shot are all produced through German craftsmanship with bright, defect-free and pollution-free material. After strict processing like heat treating, wire drawing, electronic spiral cutting, passivation molding and other processes, our products are strictly in a accordance with German Spring Association standard VDFI8001, German industrial standards DIN8201 and American Aerospace Material Specification Standard. It is widely used for surface shot blasting, sand blasting and shot blasting of stainless steel parts, aluminum alloy die castings, and copper alloy parts. According to different composition, stainless steel is classfied several grades such as 304, 410, 430, 201 and 201 stainless steel Cut Wire Shot is the most popular abrasive of them as its excellent performance. The composition of 201 stainless steeel is: C≤0.15, Cr 14.00-16.00, Ni 3.50-5.50, Mn ≤5.50-7.50, P≤0.060, S≤0.030, Si≤1.00. So you can check if 201 Stainless Steel Shot could meet your requirement. Generally 201 stainless tseel cut wire shot could be classfied two kinds. One is as cut and the other is conditioned. Compared with as cut one, conditioned is without sharpe edges and corners and has near round shape. According to this, you can choose the more suitable one. 201 Stainless Steel Shot,Sus201 Stainless Steel Shot,Ss201 Stainless Steel Shot,Cut Wire Shot Of Metal Abrasive Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com
Pipeline does not allow leakage, otherwise suction truck will not work.
Suction truck vats must be equipped with spill-prevention devices, otherwise the suction trucks can easily sink fecal sewage into the vacuum pump and damage the entire system.
The first stage oil and gas separator return port of the suction truck must be connected to the oil return port of the secondary oil and gas separator and the suction pipe must be made of a rigid pipe or hard oil resistant rubber hose (steel wire braided hose). Thermally deformed plastic tubes are not allowed.
When the suction truck is used with the new pump, it should directly add 1-2 liters of No.32 mechanical oil to the pump. When using in the cold regions of the northeast and northwest, the No. 32 refrigerating machine oil should be added.
A moisture separator should be installed at the suction port of the pump. .
Suction trucks are mainly used in septic tanks, sewage ditch and sewers and other environments to clean and clean the special vehicles, and sprinklers, garbage trucks, also known as the three major sanitation models. Has long been the country's relevant support policy to help and care , Such vehicles do not need to pay purchase tax. Mainly for urban and rural sanitation department to pump and transport manure and other sewage. It is suitable for manure extraction, sewage, sludge slurry and liquid mixed with small suspended debris, and is suitable for municipal sanitation, medium and small-sized industrial and mining enterprises, communities and schools. XCMG Chu Sheng suction truck by brand has Dongfeng suction truck, liberation suction truck, Futian suction truck, JAC suction truck, heavy truck suction truck, Shaanxi steam suction truck.
The correct use and installation method of suction truck
The proper installation of the vacuum suction pump for the suction truck, attention to the use of maintenance:.